TechnoTrend TT-connect S2-3600: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
(LNB supply and control IC information corrected from "STM LNBP21" to "Intersil ISL6423". In the PCTV452e article photo, you can see the chip clearly marked "6423Z" on the lower righthand side.)
 
(11 intermediate revisions by 6 users not shown)
Line 2: Line 2:
[[image:img_8083.jpg|right|thumb|250px|Bottom view of the S2-3600 PCB]]
[[image:img_8083.jpg|right|thumb|250px|Bottom view of the S2-3600 PCB]]


A [[DVB-S2]] [[DVB-S2 USB Devices|USB 2.0 Device]] from [[TechnoTrend]].
A [[DVB-S2]] [[DVB-S2 USB Devices|USB 2.0 Device]] from [[TechnoTrend]]. It is identical to the [[Pinnacle_PCTV_Sat_HDTV_Pro_USB_(452e)| Pinnacle PCTV Sat HDTV Pro USB 452e]].


==Overview/Features==
==Overview/Features==
Line 8: Line 8:
Upon connection to the USB port, the devices' LED is orange and turns green upon module load.<br/>
Upon connection to the USB port, the devices' LED is orange and turns green upon module load.<br/>
The USB receiver comes with a black RC5 remote control. IR events can be read from /dev/input/eventX<br/>
The USB receiver comes with a black RC5 remote control. IR events can be read from /dev/input/eventX<br/>
This card works in conjuction with Liplianin drivers (see further down the page) and Linux Kernel 2.6.38.8 or earlier<br/><br/>
With 3.2 kernels the device will work out-of-the-box


===Components used===
===Components used===


* [[Cypress Semiconductor|Cypress]] [[Cypress EZ-USB FX2|CY7C68013A (FX2LP)]] (USB 2.0 bridge)
* Cyrix CY7C68013A USB controller
* [[STMicroelectronics]] [[STMicroelectronics STB0899|STB0899]] multistandard demodulator (DVB-S and DVB-S2).
* STB0899 demod
* [[STMicroelectronics]] [[STMicroelectronics STB6100|STB6100]] 8PSK/QPSK direct conversion (zero IF) tuner for DVB-S2.
* STB6100 tuner
* [[Intersil]] [[Intersil ISL6423|ISL6423]] LNB supply and control IC.


===Identification===
===Identification===
Line 31: Line 34:


===Sample kernel output===
===Sample kernel output===
usb 1-2.3: new high speed USB device using ps3-ehci-driver and address 10<br/>
usb 1-2.3: new high speed USB device using ps3-ehci-driver and address 10
usb 1-2.3: configuration #1 chosen from 1 choice<br/>
usb 1-2.3: configuration #1 chosen from 1 choice
dvb-usb: found a ‘Technotrend TT Connect S2-3600′ in warm state.<br/>
dvb-usb: found a ‘Technotrend TT Connect S2-3600′ in warm state.
pctv452e_power_ctrl: 1<br/>
pctv452e_power_ctrl: 1
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.<br/>
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technotrend TT Connect S2-3600)<br/>
DVB: registering new adapter (Technotrend TT Connect S2-3600)
pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00.<br/>
pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00.
dvb-usb: MAC address: 00:d0:5c:64:75:3c<br/>
dvb-usb: MAC address: 00:d0:5c:64:75:3c
pctv452e_frontend_attach Enter<br/>
pctv452e_frontend_attach Enter
stb0899_attach: Attaching STB0899<br/>
stb0899_attach: Attaching STB0899
pctv452e_frontend_attach Leave Ok<br/>
pctv452e_frontend_attach Leave Ok
DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)…<br/>
DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)…
pctv452e_tuner_attach Enter<br/>
pctv452e_tuner_attach Enter
stb6100_attach: Attaching STB6100<br/>
stb6100_attach: Attaching STB6100
pctv452e_tuner_attach Leave<br/>
pctv452e_tuner_attach Leave
input: IR-receiver inside an USB DVB receiver as /class/input/input4<br/>
input: IR-receiver inside an USB DVB receiver as /class/input/input4
dvb-usb: schedule remote query interval to 500 msecs.<br/>
dvb-usb: schedule remote query interval to 500 msecs.
pctv452e_power_ctrl: 0<br/>
pctv452e_power_ctrl: 0
dvb-usb: Technotrend TT Connect S2-3600 successfully initialized and connected.<br/>
dvb-usb: Technotrend TT Connect S2-3600 successfully initialized and connected.
usbcore: registered new interface driver pctv452e<br/>
usbcore: registered new interface driver pctv452e
usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw<br/>
usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw


===Remote control support===
===Remote control support===
Line 58: Line 61:


==External links==
==External links==
* none
none
[[Category:DVB-S2 USB Devices]]
[[Category:DVB-S2 USB Devices]]

Latest revision as of 16:45, 14 July 2013

Top view of the S2-3600 PCB
Bottom view of the S2-3600 PCB

A DVB-S2 USB 2.0 Device from TechnoTrend. It is identical to the Pinnacle PCTV Sat HDTV Pro USB 452e.

Overview/Features

This is a USB 2.0 device capable of receiving DVB-S and DVB-S2 tranponders.
Upon connection to the USB port, the devices' LED is orange and turns green upon module load.
The USB receiver comes with a black RC5 remote control. IR events can be read from /dev/input/eventX
This card works in conjuction with Liplianin drivers (see further down the page) and Linux Kernel 2.6.38.8 or earlier

With 3.2 kernels the device will work out-of-the-box

Components used

Identification

Vendor ID: 0B48
Product ID: 3007

Making it work

Firmware

The device does not need any special firmware.
It is still possible to upload a new firmware to the device, although this is not implemented.

Drivers

Device driver support can be found in this S2API repository [1]

Sample kernel output

usb 1-2.3: new high speed USB device using ps3-ehci-driver and address 10
usb 1-2.3: configuration #1 chosen from 1 choice
dvb-usb: found a ‘Technotrend TT Connect S2-3600′ in warm state.
pctv452e_power_ctrl: 1
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technotrend TT Connect S2-3600)
pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00.
dvb-usb: MAC address: 00:d0:5c:64:75:3c
pctv452e_frontend_attach Enter
stb0899_attach: Attaching STB0899
pctv452e_frontend_attach Leave Ok
DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)…
pctv452e_tuner_attach Enter
stb6100_attach: Attaching STB6100
pctv452e_tuner_attach Leave
input: IR-receiver inside an USB DVB receiver as /class/input/input4
dvb-usb: schedule remote query interval to 500 msecs.
pctv452e_power_ctrl: 0
dvb-usb: Technotrend TT Connect S2-3600 successfully initialized and connected.
usbcore: registered new interface driver pctv452e
usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw

Remote control support

The black TT remote is supported by the device.

External links

none

Retrieved from "https://www.linuxtv.org/wiki/index.php?title=TechnoTrend_TT-connect_S2-3600&oldid=32167"