TerraTec Cinergy T PCIe dual: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 33: Line 33:
The first frontend supports only DVB-T, but support for analogue TV is planned for kernel 3.4 or 3.5. The second frontend supports both DVB-T and DVB-C in a multifrontend device (spec's DVB v5 API).
The first frontend supports only DVB-T, but support for analogue TV is planned for kernel 3.4 or 3.5. The second frontend supports both DVB-T and DVB-C in a multifrontend device (spec's DVB v5 API).


The supplied IR remote is not supported yet, there is generic support in the kernel module for cx23885-based DVB-cards but this does not work for this card. (modprobe cx23885 enable_885_ir=1).


Also, this card is a dual tuner in the sense that you can have two streams active at one frontend at the same time. This works for watching/recording two different channels at the same time or record one and watch another (So two times DVB-C or DVB-T, I only tried DVB-C myself).
Also, this card is a dual tuner in the sense that you can have two streams active at one frontend at the same time. This works for watching/recording two different channels at the same time or record one and watch another (So two times DVB-C or DVB-T, I only tried DVB-C myself).

== Remote Control support ==

The supplied IR remote is not supported yet, there is generic support in the kernel module for cx23885-based DVB-cards but this does not work for this card. (modprobe cx23885 enable_885_ir=1).
Another card that has the same PCIe bridge does work, see http://www.linuxtv.org/wiki/index.php/TeVii_S470

I think it's the Conexant cx23885 chipset IR receiver and transmitter logic that has to be used, see the product sheet on [http://www.conexant.com/products/entry.jsp?id=393].

Turning i2c_scan on in the kernel module gave me this output:
<pre>
[149688.088680] cx23885[0]: scan bus 0:
[149688.094389] cx23885[0]: i2c scan: found device @ 0x52 [???]
[149688.099654] cx23885[0]: i2c scan: found device @ 0xa0 [eeprom]
[149688.106237] cx23885[0]: scan bus 1:
[149688.119350] cx23885[0]: i2c scan: found device @ 0xc0 [tuner/mt2131/tda8275]
[149688.120302] cx23885[0]: i2c scan: found device @ 0xce [???]
[149688.123748] cx23885[0]: scan bus 2:
[149688.125622] cx23885[0]: i2c scan: found device @ 0x66 [???]
[149688.126235] cx23885[0]: i2c scan: found device @ 0x88 [cx25837]
[149688.126525] cx23885[0]: i2c scan: found device @ 0x98 [flatiron]
</pre>


== lspci output ==
== lspci output ==
Line 132: Line 152:
==External Links==
==External Links==
* [http://www.terratec.net/en/products/Cinergy_T_PCIe_Dual_134463.html TerraTec Cinergy T PCIe dual product page]
* [http://www.terratec.net/en/products/Cinergy_T_PCIe_Dual_134463.html TerraTec Cinergy T PCIe dual product page]
* [http://www.conexant.com/products/entry.jsp?id=393|Conexant CX23885 Product Sheet]



[[Category:DVB-T_PCIe_Cards]] [[Category:DVB-C PCIe Cards]]
[[Category:DVB-T_PCIe_Cards]] [[Category:DVB-C PCIe Cards]]

Revision as of 12:12, 27 July 2012

A dual-tuner DVB-T PCIe card sold by TerraTec. This card appears to be supported from kernel 3.3 by LinuxTV drivers (not confirmed). Testing on 3.3.0 did not appear to work, while 3.4.3 works (DVB-T/C no analog). In 3.4.6 it works quite well, also tested watching two channels at the same same on DVB-C and this works.

Overview/Features

This is technically a very interesting card. The hardware is as follows:

  • Tuner #1: microtune mt2063
  • Demodulators #1: drx-3916k DVB-T/Analoge TV
  • Tuner #2: microtune mt2063
  • Demodulators #2: drx-3913k DVB-T/DVB-C
  • PCI Express x1 Bridge: Conexant cx23885

Inputs:

  • 1x Antenna (Coax)
  • 1x Remote (2,5 mm jack)

Package contents:

  • Card
  • Low profile bracket
  • Remote (+ AAA batteries)
  • DVB-T antenna
  • IR receiver
  • Windows Software & Installation DVD
  • Quick setup guide

Support

This card is supported from kernel version 3.3 (?). The microtune tuner was merged in kernel version 3.3 (see first submission).

The card itself was added upstream on LinuxTV's git repository on 2011-12-17 and may have been merged upstream.

The first frontend supports only DVB-T, but support for analogue TV is planned for kernel 3.4 or 3.5. The second frontend supports both DVB-T and DVB-C in a multifrontend device (spec's DVB v5 API).


Also, this card is a dual tuner in the sense that you can have two streams active at one frontend at the same time. This works for watching/recording two different channels at the same time or record one and watch another (So two times DVB-C or DVB-T, I only tried DVB-C myself).

Remote Control support

The supplied IR remote is not supported yet, there is generic support in the kernel module for cx23885-based DVB-cards but this does not work for this card. (modprobe cx23885 enable_885_ir=1). Another card that has the same PCIe bridge does work, see http://www.linuxtv.org/wiki/index.php/TeVii_S470

I think it's the Conexant cx23885 chipset IR receiver and transmitter logic that has to be used, see the product sheet on [1].

Turning i2c_scan on in the kernel module gave me this output:

[149688.088680] cx23885[0]: scan bus 0:
[149688.094389] cx23885[0]: i2c scan: found device @ 0x52  [???]
[149688.099654] cx23885[0]: i2c scan: found device @ 0xa0  [eeprom]
[149688.106237] cx23885[0]: scan bus 1:
[149688.119350] cx23885[0]: i2c scan: found device @ 0xc0  [tuner/mt2131/tda8275]
[149688.120302] cx23885[0]: i2c scan: found device @ 0xce  [???]
[149688.123748] cx23885[0]: scan bus 2:
[149688.125622] cx23885[0]: i2c scan: found device @ 0x66  [???]
[149688.126235] cx23885[0]: i2c scan: found device @ 0x88  [cx25837]
[149688.126525] cx23885[0]: i2c scan: found device @ 0x98  [flatiron]

lspci output

Kernel 3.4.6

01:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04)
	Subsystem: TERRATEC Electronic GmbH Device [153b:117e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=2M]
	Capabilities: [40] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] Vital Product Data
		Product Name: "
		End
	Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [200 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed+ WRR32+ WRR64+ WRR128-
		Ctrl:	ArbSelect=WRR64
		Status:	InProgress-
		Port Arbitration Table [240] <?>
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
			Status:	NegoPending- InProgress-
	Kernel driver in use: cx23885
	Kernel modules: cx23885

dmesg output

Jul 25 20:18:32 tvserver kernel: [   25.884176] cx25840 12-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
Jul 25 20:18:32 tvserver kernel: [   25.916206] cx23885_dvb_register() allocating 1 frontend(s)
Jul 25 20:18:32 tvserver kernel: [   25.916209] cx23885[0]: cx23885 based dvb card
...
Jul 25 20:18:32 tvserver kernel: [   26.182648] drxk: status = 0x639160d9
Jul 25 20:18:32 tvserver kernel: [   26.182674] drxk: detected a drx-3916k, spin A3, xtal 20.250 MHz
Jul 25 20:18:32 tvserver kernel: [   26.258198] DRXK driver version 0.9.4300
Jul 25 20:18:32 tvserver kernel: [   26.281462] drxk: frontend initialized.
Jul 25 20:18:32 tvserver kernel: [   26.320861] mt2063_attach: Attaching MT2063
Jul 25 20:18:32 tvserver kernel: [   26.320865] DVB: registering new adapter (cx23885[0])
Jul 25 20:18:32 tvserver kernel: [   26.320869] DVB: registering adapter 0 frontend 0 (DRXK DVB-T)...
Jul 25 20:18:32 tvserver kernel: [   26.321292] cx23885_dvb_register() allocating 1 frontend(s)
Jul 25 20:18:32 tvserver kernel: [   26.321295] cx23885[0]: cx23885 based dvb card
Jul 25 20:18:32 tvserver kernel: [   26.338405] drxk: status = 0x639130d9
Jul 25 20:18:32 tvserver kernel: [   26.338431] drxk: detected a drx-3913k, spin A3, xtal 20.250 MHz
Jul 25 20:18:32 tvserver kernel: [   26.413948] DRXK driver version 0.9.4300
Jul 25 20:18:32 tvserver kernel: [   26.437218] drxk: frontend initialized.
Jul 25 20:18:32 tvserver kernel: [   26.437225] mt2063_attach: Attaching MT2063
Jul 25 20:18:32 tvserver kernel: [   26.437228] DVB: registering new adapter (cx23885[0])
Jul 25 20:18:32 tvserver kernel: [   26.437231] DVB: registering adapter 1 frontend 0 (DRXK DVB-C DVB-T)...
Jul 25 20:18:32 tvserver kernel: [   26.437612] cx23885_dev_checkrevision() Hardware revision = 0xa5
Jul 25 20:18:32 tvserver kernel: [   26.437617] cx23885[0]/0: found at 0000:01:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xfe400000
..
Jul 25 20:24:47 tvserver kernel: [  400.894466] drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params:
Jul 25 20:24:47 tvserver kernel: [  400.894472] drxk: 02 00 00 00 10 00 07 00 03 02                    ..........
(last two lines keeps repeating every 20 seconds. Works perfectly though)

user@tvserver:~$ uname -ar
Linux tvserver 3.4.6-030406-generic #201207191609 SMP Thu Jul 19 20:11:13 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

Other Images

External Links