Difference between revisions of "TerraTec Cinergy T USB RC"

From LinuxTVWiki
Jump to: navigation, search
(Created page with '{{Device_List_Medium_Detail/Header | content = {{USB_Device_Data |renderwith=Device_List_Medium_Detail/Row |selatt1=did |selval1=terratec-trc-mk2 }} }} === Version 2 AF9015 ===...')
 
 
(3 intermediate revisions by one user not shown)
Line 10: Line 10:
 
=== Version 2 AF9015 ===
 
=== Version 2 AF9015 ===
 
USB ID: 0ccd:0097
 
USB ID: 0ccd:0097
 +
Manufacturer: NEWMI
  
There is a patch available to support this device:
+
Uses tuner NXP TDA18218 and AF9015A. Use Kernel-2.6.37 or v4l-dvb git.
http://www.mail-archive.com/linux-media@vger.kernel.org/msg16117.html
+
  
However, this patch doesnt fit anymore perfectly on 2.6.35.4 due to some changes on IR and there is no official support in dvb-hg; so this patch needs to be adapted and applied.
+
After loading dvb-usb-af9015 you should see the following:
Testing afterwards can be done as usual, for example with tzap, scan or w_scan. Needs also firmware dvb-usb-af9015.fw.
+
<pre>
 
+
usb 3-3: new high speed USB device using ehci_hcd and address 3
Uses tuner NXP TDA18218, which is quite similiar to TDA18271. Preliminary support for this tuner is added with the patch above.
+
usb 3-3: New USB device found, idVendor=0ccd, idProduct=0097
 +
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
 +
usb 3-3: Product: USB2.0 DVB-T TV Stick
 +
usb 3-3: Manufacturer: NEWMI
 +
usb 3-3: SerialNumber: xxxxxxxxxxxxxx
 +
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
 +
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
 +
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
 +
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
 +
DVB: registering new adapter (TerraTec Cinergy T Stick RC)
 +
af9013: firmware version:4.95.0
 +
DVB: registering adapter 4 frontend 0 (Afatech AF9013 DVB-T)...
 +
NXP TDA18218 successfully identified.
 +
dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
 +
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
 +
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1
 +
</pre>
  
 
[[Category: DVB-T USB Devices]]
 
[[Category: DVB-T USB Devices]]

Latest revision as of 17:36, 5 January 2011

Vendor
Device/Model
Supported ID on
Interface
Hardware Firmware Comment / Pictures URL E
TerraTec Cinergy T USB RC (mk II) Yes, in kernel since 2.6.37 0ccd:0097 USB2.0 Afatech AF9015A + TDA18218HN + EM24C02A dvb-usb-af9015.fw Dvb-t-usb-terratec-cinergy-T-RC-mk2-001.jpg [1] Jump to the place where you can edit this entry

Version 2 AF9015

USB ID: 0ccd:0097 Manufacturer: NEWMI

Uses tuner NXP TDA18218 and AF9015A. Use Kernel-2.6.37 or v4l-dvb git.

After loading dvb-usb-af9015 you should see the following:

usb 3-3: new high speed USB device using ehci_hcd and address 3
usb 3-3: New USB device found, idVendor=0ccd, idProduct=0097
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: USB2.0 DVB-T TV Stick
usb 3-3: Manufacturer: NEWMI
usb 3-3: SerialNumber: xxxxxxxxxxxxxx
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TerraTec Cinergy T Stick RC)
af9013: firmware version:4.95.0
DVB: registering adapter 4 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218 successfully identified.
dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1