TerraTec Cinergy T USB RC: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 12: Line 12:
Manufacturer: NEWMI
Manufacturer: NEWMI


Uses tuner NXP TDA18218 and AF9015A. Use Kernel-2.6.37 or v4l-dvb git.
There is a patch available to support this device:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg16117.html


After loading dvb-usb-af9015 you should see the following:
However, this patch doesnt fit anymore perfectly on 2.6.35.4 due to some changes on IR and there is no official support in dvb-hg; so this patch needs to be adapted and applied.
Testing afterwards can be done as usual, for example with tzap, scan or w_scan. Needs also firmware [http://palosaari.fi/linux/v4l-dvb/firmware/af9015/4.95.0.0/dvb-usb-af9015.fw dvb-usb-af9015.fw].

Note: current Windows driver uses firmware 5.1.0.0, but the patched dvb-usb-af9015 works better with 4.95.0.0

Uses tuner NXP TDA18218, which is quite similiar to TDA18271. Preliminary support for this tuner is added with the patch above.

After applying patch and loading dvb-usb-af9015 you should see the following:
<pre>
<pre>
usb 3-3: new high speed USB device using ehci_hcd and address 3
usb 3-3: new high speed USB device using ehci_hcd and address 3
Line 41: Line 33:
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1
</pre>

=== [http://www.mail-archive.com/linux-media@vger.kernel.org/msg16117.html patch] with changes to linux-2.6.35.4 ===
<pre>
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/Kconfig /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Kconfig
--- linux-2.6.35.4/drivers/media/common/tuners/Kconfig 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Kconfig 2011-01-04 13:59:07.642000010 +0100
@@ -179,4 +179,11 @@
help
A driver for the silicon tuner MAX2165 from Maxim.
+config MEDIA_TUNER_TDA18218
+ tristate "NXP TDA18218 silicon tuner"
+ depends on VIDEO_MEDIA && I2C
+ default m if MEDIA_TUNER_CUSTOMISE
+ help
+ A driver for the silicon tuner TDA18218 from NXP.
+
endif # MEDIA_TUNER_CUSTOMISE
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/Makefile /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Makefile
--- linux-2.6.35.4/drivers/media/common/tuners/Makefile 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/Makefile 2011-01-04 13:59:50.733000011 +0100
@@ -24,6 +24,7 @@
obj-$(CONFIG_MEDIA_TUNER_MXL5007T) += mxl5007t.o
obj-$(CONFIG_MEDIA_TUNER_MC44S803) += mc44s803.o
obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o
+obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/tda18218.c /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.c
--- linux-2.6.35.4/drivers/media/common/tuners/tda18218.c 1970-01-01 01:00:00.000000000 +0100
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.c 2011-01-04 15:22:54.068000023 +0100
@@ -0,0 +1,471 @@
+/*
+ * Driver for NXP TDA18218 silicon tuner
+ *
+ * Copyright (C) 2010 Lauris Ding <ld...@gmx.de>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include "tda18218.h"
+//#include "compat.h"
+#include "tda18218_priv.h"
+
+static int tda18218_write_reg(struct dvb_frontend *fe, u8 reg, u8 val)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 buf[2] = { reg, val };
+ struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0,
+ .buf = buf, .len = 2 };
+ int ret;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ /* write register */
+ ret = i2c_transfer(priv->i2c, &msg, 1);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ if (ret != 1)
+ printk(KERN_WARNING "I2C write failed ret: %d reg: %02x\n", ret, reg);
+
+ return (ret == 1 ? 0 : ret);
+}
+
+static int tda18218_write_regs(struct dvb_frontend *fe, u8 reg,
+ u8 *val, u8 len)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 buf[1+len];
+ struct i2c_msg msg = {
+ .addr = priv->cfg->i2c_address,
+ .flags = 0,
+ .len = sizeof(buf),
+ .buf = buf };
+
+ int ret;
+
+ buf[0] = reg;
+ memcpy(&buf[1], val, len);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ ret = i2c_transfer(priv->i2c, &msg, 1);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (ret != 1)
+ printk(KERN_WARNING "I2C write failed ret: %d reg: %02x len: %d\n", ret, reg, len);
+
+ return (ret == 1 ? 0 : ret);
+}
+
+/*static int tda18218_read_reg(struct tda18218_priv *priv, u16 reg, u8 *val)
+{
+ u8 obuf[3] = { reg >> 8, reg & 0xff, 0 };
+ u8 ibuf[1];
+ struct i2c_msg msg[2] = {
+ {
+ .addr = 0x3a,
+ .flags = 0,
+ .len = sizeof(obuf),
+ .buf = obuf
+ }, {
+ .addr = 0x3a,
+ .flags = I2C_M_RD,
+ .len = sizeof(ibuf),
+ .buf = ibuf
+ }
+ };
+
+ if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+ printk(KERN_WARNING "I2C read failed reg:%04x\n", reg);
+ return -EREMOTEIO;
+ }
+ *val = ibuf[0];
+ return 0;
+}*/
+
+static int tda18218_read_regs(struct dvb_frontend *fe)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 *regs = priv->tda18218_regs;
+ u8 buf = 0x00;
+ int ret;
+ //int i;
+ struct i2c_msg msg[] = {
+ { .addr = 0xc0, .flags = 0,
+ .buf = &buf, .len = 1 },
+ { .addr = 0xc0, .flags = I2C_M_RD,
+ .buf = regs, .len = 59 }
+ };
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ /* read all registers */
+ ret = i2c_transfer(priv->i2c, msg, 2);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ if (ret != 2)
+ printk(KERN_WARNING "I2C read failed ret: %d\n", ret);
+
+ /*for(i = 0; i <= 58; i++)
+ printk("Register %d: %02x\n", i, 0xff & regs[i]);*/
+
+ return (ret == 2 ? 0 : ret);
+}
+
+static int tda18218_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ u8 *regs = priv->tda18218_regs;
+ u8 Fc, BP;
+ int i, ret;
+ u16 if1, bw;
+ u32 freq;
+
+ u8 paramsbuf[4][6] = {
+ { 0x03, 0x1a },
+ { 0x04, 0x0a },
+ { 0x01, 0x0f },
+ { 0x01, 0x0f },
+ };
+
+ u8 agcbuf[][2] = {
+ { 0x1a, 0x0e },
+ { 0x20, 0x60 },
+ { 0x23, 0x02 },
+ { 0x20, 0xa0 },
+ { 0x23, 0x09 },
+ { 0x20, 0xe0 },
+ { 0x23, 0x0c },
+ { 0x20, 0x40 },
+ { 0x23, 0x01 },
+ { 0x20, 0x80 },
+ { 0x23, 0x08 },
+ { 0x20, 0xc0 },
+ { 0x23, 0x0b },
+ { 0x24, 0x1c },
+ { 0x24, 0x0c },
+ };
+
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ bw = 6000;
+ Fc = 0;
+ break;
+ case BANDWIDTH_7_MHZ:
+ bw = 7000;
+ Fc = 1;
+ break;
+ case BANDWIDTH_8_MHZ:
+ bw = 8000;
+ Fc = 2;
+ break;
+ default:
+ printk(KERN_WARNING "Invalid bandwidth");
+ return -EINVAL;
+ }
+
+ if1 = bw / 2;
+
+ if((params->frequency >= 174000000) && (params->frequency < 188000000)) {
+ BP = 3;
+ }
+ else if((params->frequency >= 188000000) && (params->frequency < 253000000)) {
+ BP = 4;
+ }
+ else if((params->frequency >= 253000000) && (params->frequency < 343000000)) {
+ BP = 5;
+ }
+ else if((params->frequency >= 343000000) && (params->frequency <= 870000000)) {
+ BP = 6;
+ }
+ else {
+ printk(KERN_WARNING "Frequency out of range");
+ return -EINVAL;
+ }
+
+ freq = params->frequency;
+ freq /= 1000;
+ freq +=if1;
+ freq *= 16;
+
+ tda18218_read_regs(fe);
+
+ paramsbuf[0][2] = regs[0x1a] | BP;
+ paramsbuf[0][3] = regs[0x1b] & ~3;
+ paramsbuf[0][3] = regs[0x1b] | Fc;
+ paramsbuf[0][4] = regs[0x1c] | 0x0a;
+
+ paramsbuf[1][2] = freq >> 16;
+ paramsbuf[1][3] = freq >> 8;
+ paramsbuf[1][4] = (freq & 0xf0) | (regs[0x0c] & 0x0f);
+ paramsbuf[1][5] = 0xff;
+ paramsbuf[2][2] = regs[0x0f] | 0x40;
+ paramsbuf[3][2] = 0x09;
+
+ tda18218_write_reg(fe, 0x04, 0x03);
+
+ for(i = 0; i < ARRAY_SIZE(paramsbuf); i++) {
+
+ /* write registers */
+ ret = tda18218_write_regs(fe, paramsbuf[i][1], &paramsbuf[i][2], paramsbuf[i][0]);
+
+ if (ret)
+ goto error;
+ }
+ for(i = 0; i < ARRAY_SIZE(agcbuf); i++) {
+ tda18218_write_reg(fe, agcbuf[i][0], agcbuf[i][1]);
+ }
+
+ //tda18218_write_reg(fe, 0x03, 0x00);
+ //tda18218_write_reg(fe, 0x04, 0x00);
+ //tda18218_write_reg(fe, 0x20, 0xc7);
+
+ msleep(60);
+ i = 0;
+ while(i < 10) {
+ tda18218_read_regs(fe);
+ if((regs[0x01] & 0x60) == 0x60)
+ printk(KERN_INFO "We've got a lock!"); break;
+ msleep(20);
+ i++;
+ }
+
+ priv->bandwidth = params->u.ofdm.bandwidth;
+ priv->frequency = params->frequency;
+ return 0;
+error:
+ return ret;
+}
+
+static int tda18218_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static int tda18218_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct tda18218_priv *priv = fe->tuner_priv;
+ *bandwidth = priv->bandwidth;
+ return 0;
+}
+
+static int tda18218_init(struct dvb_frontend *fe)
+{
+ //struct tda18218_priv *priv = fe->tuner_priv;
+ //u8 *regs = priv->tda18218_regs;
+ int i;
+ int ret;
+
+ u8 initbuf[][18] = {
+ { 0x10, 0x05, 0x00, 0x00, 0xd0, 0x00, 0x40, 0x00, 0x00, 0x07, 0xff, 0x84, 0x09, 0x00, 0x13, 0x00, 0x00, 0x01 },
+ { 0x0b, 0x15, 0x84, 0x09, 0xf0, 0x19, 0x0a, 0x0e, 0x29, 0x98, 0x00, 0x00, 0x58 },
+ { 0x10, 0x24, 0x0c, 0x48, 0x85, 0xc9, 0xa7, 0x00, 0x00, 0x00, 0x30, 0x81, 0x80, 0x00, 0x39, 0x00, 0x8a, 0x00 },
+ { 0x07, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf6, 0xf6 },
+ };
+
+ u8 initbuf2[4];
+
+ for(i = 0; i < ARRAY_SIZE(initbuf); i++) {
+
+ /* write registers */
+ ret = tda18218_write_regs(fe, initbuf[i][1], &initbuf[i][2], initbuf[i][0]);
+
+ if (ret != 0) {
+ printk(KERN_ERR "init: ERROR: i2c_transfer returned: %d\n", ret);
+ return -EREMOTEIO;
+ }
+ if(i == 1) {
+ tda18218_write_reg(fe, 0x22, 0x8c);
+ }
+ }
+
+ tda18218_write_reg(fe, 0x05, 0x80);
+ tda18218_write_reg(fe, 0x05, 0x00);
+ tda18218_write_reg(fe, 0x05, 0x20);
+ tda18218_write_reg(fe, 0x05, 0x00);
+ tda18218_write_reg(fe, 0x27, 0xde);
+ tda18218_write_reg(fe, 0x17, 0xf8);
+ tda18218_write_reg(fe, 0x18, 0x0f);
+ tda18218_write_reg(fe, 0x1c, 0x8b);
+ tda18218_write_reg(fe, 0x29, 0x02);
+ tda18218_write_reg(fe, 0x19, 0x1a);
+ tda18218_write_reg(fe, 0x11, 0x13);
+
+ initbuf2[0] = 0x0a;
+ initbuf2[1] = 0x5c;
+ initbuf2[2] = 0xc6;
+ initbuf2[3] = 0x07;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 3);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x05, 0x40);
+ tda18218_write_reg(fe, 0x05, 0x00);
+ tda18218_write_reg(fe, 0x05, 0x20);
+ tda18218_write_reg(fe, 0x11, 0xed);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x19, 0x2a);
+ tda18218_write_reg(fe, 0x05, 0x58);
+ tda18218_write_reg(fe, 0x05, 0x18);
+ tda18218_write_reg(fe, 0x05, 0x38);
+ tda18218_write_reg(fe, 0x29, 0x03);
+ tda18218_write_reg(fe, 0x19, 0x1a);
+ tda18218_write_reg(fe, 0x11, 0x13);
+ initbuf2[0] = 0x0a;
+ initbuf2[1] = 0xbe;
+ initbuf2[2] = 0x6e;
+ initbuf2[3] = 0x07;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 3);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x05, 0x58);
+ tda18218_write_reg(fe, 0x05, 0x18);
+ tda18218_write_reg(fe, 0x05, 0x38);
+ tda18218_write_reg(fe, 0x11, 0xed);
+ tda18218_write_reg(fe, 0x0f, 0x49);
+ tda18218_write_reg(fe, 0x19, 0x2a);
+ tda18218_write_reg(fe, 0x05, 0x58);
+ tda18218_write_reg(fe, 0x05, 0x18);
+ tda18218_write_reg(fe, 0x05, 0x38);
+ tda18218_write_reg(fe, 0x19, 0x0a);
+ tda18218_write_reg(fe, 0x27, 0xc9);
+ tda18218_write_reg(fe, 0x11, 0x13);
+ initbuf2[0] = 0x17;
+ initbuf2[1] = 0xf0;
+ initbuf2[2] = 0x19;
+ initbuf2[3] = 0x00;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 2);
+ tda18218_write_reg(fe, 0x1c, 0x98);
+ tda18218_write_reg(fe, 0x29, 0x03);
+ tda18218_write_reg(fe, 0x2a, 0x00);
+ tda18218_write_reg(fe, 0x2a, 0x01);
+ tda18218_write_reg(fe, 0x2a, 0x02);
+ tda18218_write_reg(fe, 0x2a, 0x03);
+ tda18218_write_reg(fe, 0x1c, 0x98);
+ tda18218_write_reg(fe, 0x18, 0x19);
+ tda18218_write_reg(fe, 0x22, 0x9c);
+ tda18218_write_reg(fe, 0x1f, 0x58);
+ tda18218_write_reg(fe, 0x24, 0x0c);
+ tda18218_write_reg(fe, 0x1c, 0x88);
+ tda18218_write_reg(fe, 0x20, 0x10);
+ tda18218_write_reg(fe, 0x21, 0x4c);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x21, 0x48);
+ tda18218_write_reg(fe, 0x1f, 0x5b);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x59);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5a);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5f);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5d);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x1f, 0x5e);
+ tda18218_write_reg(fe, 0x20, 0x00);
+ tda18218_write_reg(fe, 0x20, 0x60);
+ tda18218_write_reg(fe, 0x23, 0x02);
+ tda18218_write_reg(fe, 0x20, 0xa0);
+ tda18218_write_reg(fe, 0x23, 0x09);
+ tda18218_write_reg(fe, 0x20, 0xe0);
+ tda18218_write_reg(fe, 0x23, 0x0c);
+ tda18218_write_reg(fe, 0x20, 0x40);
+ tda18218_write_reg(fe, 0x23, 0x01);
+ tda18218_write_reg(fe, 0x20, 0x80);
+ tda18218_write_reg(fe, 0x23, 0x08);
+ tda18218_write_reg(fe, 0x20, 0xc0);
+ tda18218_write_reg(fe, 0x23, 0x0b);
+ tda18218_write_reg(fe, 0x1c, 0x98);
+ tda18218_write_reg(fe, 0x22, 0x8c);
+ initbuf2[0] = 0x17;
+ initbuf2[1] = 0xb0;
+ initbuf2[2] = 0x59;
+ initbuf2[3] = 0x00;
+ //tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 2);
+ initbuf2[0] = 0x1a;
+ initbuf2[1] = 0x0e;
+ initbuf2[2] = 0x2a;
+ initbuf2[3] = 0x98;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 3);
+ initbuf2[0] = 0x17;
+ initbuf2[1] = 0xb0;
+ initbuf2[2] = 0x59;
+ initbuf2[3] = 0x00;
+ tda18218_write_regs(fe, initbuf2[0], &initbuf2[1], 2);
+ tda18218_write_reg(fe, 0x2d, 0x81);
+ tda18218_write_reg(fe, 0x29, 0x02);
+
+ return 0;
+}
+
+static int tda18218_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static const struct dvb_tuner_ops tda18218_tuner_ops = {
+ .info = {
+ .name = "NXP TDA18218",
+ .frequency_min = TDA18218_MIN_FREQ,
+ .frequency_max = TDA18218_MAX_FREQ,
+ .frequency_step = TDA18218_STEP,
+ },
+
+ .release = tda18218_release,
+ .init = tda18218_init,
+
+ .set_params = tda18218_set_params,
+ .get_frequency = tda18218_get_frequency,
+ .get_bandwidth = tda18218_get_bandwidth,
+};
+
+struct dvb_frontend * tda18218_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct tda18218_config *cfg)
+{
+ struct tda18218_priv *priv = NULL;
+
+ priv = kzalloc(sizeof(struct tda18218_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->cfg = cfg;
+ priv->i2c = i2c;
+
+ fe->tuner_priv = priv;
+
+ tda18218_read_regs(fe);
+ if (priv->tda18218_regs[0x00] != 0xc0) {
+ printk(KERN_WARNING "Device is not a TDA18218!\n");
+ kfree(priv);
+ return NULL;
+ }
+
+ printk(KERN_INFO "NXP TDA18218 successfully identified.\n");
+ memcpy(&fe->ops.tuner_ops, &tda18218_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ return fe;
+}
+EXPORT_SYMBOL(tda18218_attach);
+
+MODULE_DESCRIPTION("NXP TDA18218 silicon tuner driver");
+MODULE_AUTHOR("Lauris Ding <ld...@gmx.de>");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/tda18218.h /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.h
--- linux-2.6.35.4/drivers/media/common/tuners/tda18218.h 1970-01-01 01:00:00.000000000 +0100
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218.h 2011-01-04 14:03:39.306000007 +0100
@@ -0,0 +1,44 @@
+/*
+ * Driver for NXP TDA18218 silicon tuner
+ *
+ * Copyright (C) 2010 Lauris Ding <ld...@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef TDA18218_H
+#define TDA18218_H
+
+#include "dvb_frontend.h"
+
+struct tda18218_config {
+ u8 i2c_address;
+};
+
+#if defined(CONFIG_MEDIA_TUNER_TDA18218) || (defined(CONFIG_MEDIA_TUNER_TDA18218_MODULE) && defined(MODULE))
+extern struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct tda18218_config *cfg);
+#else
+static inline struct dvb_frontend *tda18218_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct tda18218_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif // CONFIG_MEDIA_TUNER_TDA18218
+
+#endif
diff -Nru linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h
--- linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h 1970-01-01 01:00:00.000000000 +0100
+++ /usr/src/linux-2.6.35.4/drivers/media/common/tuners/tda18218_priv.h 2011-01-04 14:04:36.744000011 +0100
@@ -0,0 +1,36 @@
+/*
+ * Driver for NXP TDA18218 silicon tuner
+ *
+ * Copyright (C) 2010 Lauris Ding <ld...@gmx.de>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef TDA18218_PRIV_H
+#define TDA18218_PRIV_H
+
+#define TDA18218_STEP 1000 /* 1 kHz */
+#define TDA18218_MIN_FREQ 174000000 /* 174 MHz */
+#define TDA18218_MAX_FREQ 864000000 /* 864 MHz */
+
+struct tda18218_priv {
+ u8 tda18218_regs[0x3b];
+ struct tda18218_config *cfg;
+ struct i2c_adapter *i2c;
+
+ u32 frequency;
+ u32 bandwidth;
+};
+
+#endif
diff -Nru linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c
--- linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/af9015.c 2011-01-05 10:21:43.993000001 +0100
@@ -31,6 +31,7 @@
#include "tda18271.h"
#include "mxl5005s.h"
#include "mc44s803.h"
+#include "tda18218.h"
static int dvb_usb_af9015_debug;
module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
@@ -272,7 +273,8 @@
while (i < num) {
if (msg[i].addr == af9015_af9013_config[0].demod_address ||
- msg[i].addr == af9015_af9013_config[1].demod_address) {
+ msg[i].addr == af9015_af9013_config[1].demod_address ||
+ msg[i].addr == 0x3a) {
addr = msg[i].buf[0] << 8;
addr += msg[i].buf[1];
mbox = msg[i].buf[2];
@@ -285,7 +287,8 @@
if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
if (msg[i].addr ==
- af9015_af9013_config[0].demod_address)
+ af9015_af9013_config[0].demod_address ||
+ msg[i].addr == 0x3a)
req.cmd = READ_MEMORY;
else
req.cmd = READ_I2C;
@@ -300,7 +303,8 @@
} else if (msg[i].flags & I2C_M_RD) {
ret = -EINVAL;
if (msg[i].addr ==
- af9015_af9013_config[0].demod_address)
+ af9015_af9013_config[0].demod_address ||
+ msg[i].addr == 0x3a)
goto error;
else
req.cmd = READ_I2C;
@@ -314,7 +318,8 @@
i += 1;
} else {
if (msg[i].addr ==
- af9015_af9013_config[0].demod_address)
+ af9015_af9013_config[0].demod_address ||
+ msg[i].addr == 0x3a)
req.cmd = WRITE_MEMORY;
else
req.cmd = WRITE_I2C;
@@ -556,46 +561,6 @@
return ret;
}
-/* hash (and dump) eeprom */
-static int af9015_eeprom_hash(struct usb_device *udev)
-{
- static const unsigned int eeprom_size = 256;
- unsigned int reg;
- int ret;
- u8 val, *eeprom;
- struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
-
- eeprom = kmalloc(eeprom_size, GFP_KERNEL);
- if (eeprom == NULL)
- return -ENOMEM;
-
- for (reg = 0; reg < eeprom_size; reg++) {
- req.addr = reg;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto free;
- eeprom[reg] = val;
- }
-
- if (dvb_usb_af9015_debug & 0x01)
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
- eeprom_size);
-
- BUG_ON(eeprom_size % 4);
-
- af9015_config.eeprom_sum = 0;
- for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) {
- af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32;
- af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
- }
-
- deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum);
-
- ret = 0;
-free:
- kfree(eeprom);
- return ret;
-}
static int af9015_download_ir_table(struct dvb_usb_device *d)
{
@@ -733,132 +698,12 @@
return ret;
}
-struct af9015_setup {
- unsigned int id;
- struct dvb_usb_rc_key *rc_key_map;
- unsigned int rc_key_map_size;
- u8 *ir_table;
- unsigned int ir_table_size;
-};
-
-static const struct af9015_setup *af9015_setup_match(unsigned int id,
- const struct af9015_setup *table)
-{
- for (; table->rc_key_map; table++)
- if (table->id == id)
- return table;
- return NULL;
-}
-
-static const struct af9015_setup af9015_setup_modparam[] = {
- { AF9015_REMOTE_A_LINK_DTU_M,
- ir_codes_af9015_table_a_link, ARRAY_SIZE(ir_codes_af9015_table_a_link),
- af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
- { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
- ir_codes_af9015_table_msi, ARRAY_SIZE(ir_codes_af9015_table_msi),
- af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
- { AF9015_REMOTE_MYGICTV_U718,
- ir_codes_af9015_table_mygictv, ARRAY_SIZE(ir_codes_af9015_table_mygictv),
- af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
- { AF9015_REMOTE_DIGITTRADE_DVB_T,
- ir_codes_af9015_table_digittrade, ARRAY_SIZE(ir_codes_af9015_table_digittrade),
- af9015_ir_table_digittrade, ARRAY_SIZE(af9015_ir_table_digittrade) },
- { AF9015_REMOTE_AVERMEDIA_KS,
- ir_codes_af9015_table_avermedia, ARRAY_SIZE(ir_codes_af9015_table_avermedia),
- af9015_ir_table_avermedia_ks, ARRAY_SIZE(af9015_ir_table_avermedia_ks) },
- { }
-};
-
-/* don't add new entries here anymore, use hashes instead */
-static const struct af9015_setup af9015_setup_usbids[] = {
- { USB_VID_LEADTEK,
- ir_codes_af9015_table_leadtek, ARRAY_SIZE(ir_codes_af9015_table_leadtek),
- af9015_ir_table_leadtek, ARRAY_SIZE(af9015_ir_table_leadtek) },
- { USB_VID_VISIONPLUS,
- ir_codes_af9015_table_twinhan, ARRAY_SIZE(ir_codes_af9015_table_twinhan),
- af9015_ir_table_twinhan, ARRAY_SIZE(af9015_ir_table_twinhan) },
- { USB_VID_KWORLD_2, /* TODO: use correct rc keys */
- ir_codes_af9015_table_twinhan, ARRAY_SIZE(ir_codes_af9015_table_twinhan),
- af9015_ir_table_kworld, ARRAY_SIZE(af9015_ir_table_kworld) },
- { USB_VID_AVERMEDIA,
- ir_codes_af9015_table_avermedia, ARRAY_SIZE(ir_codes_af9015_table_avermedia),
- af9015_ir_table_avermedia, ARRAY_SIZE(af9015_ir_table_avermedia) },
- { USB_VID_MSI_2,
- ir_codes_af9015_table_msi_digivox_iii, ARRAY_SIZE(ir_codes_af9015_table_msi_digivox_iii),
- af9015_ir_table_msi_digivox_iii, ARRAY_SIZE(af9015_ir_table_msi_digivox_iii) },
- { }
-};
-
-static const struct af9015_setup af9015_setup_hashes[] = {
- { 0xb8feb708,
- ir_codes_af9015_table_msi, ARRAY_SIZE(ir_codes_af9015_table_msi),
- af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
- { 0xa3703d00,
- ir_codes_af9015_table_a_link, ARRAY_SIZE(ir_codes_af9015_table_a_link),
- af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
- { 0x9b7dc64e,
- ir_codes_af9015_table_mygictv, ARRAY_SIZE(ir_codes_af9015_table_mygictv),
- af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
- { }
-};
-
-static void af9015_set_remote_config(struct usb_device *udev,
- struct dvb_usb_device_properties *props)
-{
- const struct af9015_setup *table = NULL;
-
- if (dvb_usb_af9015_remote) {
- /* load remote defined as module param */
- table = af9015_setup_match(dvb_usb_af9015_remote,
- af9015_setup_modparam);
- } else {
- u16 vendor = le16_to_cpu(udev->descriptor.idVendor);
-
- table = af9015_setup_match(af9015_config.eeprom_sum,
- af9015_setup_hashes);
-
- if (!table && vendor == USB_VID_AFATECH) {
- /* Check USB manufacturer and product strings and try
- to determine correct remote in case of chip vendor
- reference IDs are used.
- DO NOT ADD ANYTHING NEW HERE. Use hashes instead.
- */
- char manufacturer[10];
- memset(manufacturer, 0, sizeof(manufacturer));
- usb_string(udev, udev->descriptor.iManufacturer,
- manufacturer, sizeof(manufacturer));
- if (!strcmp("MSI", manufacturer)) {
- /* iManufacturer 1 MSI
- iProduct 2 MSI K-VOX */
- table = af9015_setup_match(
- AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
- af9015_setup_modparam);
- } else if (udev->descriptor.idProduct ==
- cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
- table = &(const struct af9015_setup){ 0,
- ir_codes_af9015_table_trekstor,
- ARRAY_SIZE(ir_codes_af9015_table_trekstor),
- af9015_ir_table_trekstor,
- ARRAY_SIZE(af9015_ir_table_trekstor)
- };
- }
- } else if (!table)
- table = af9015_setup_match(vendor, af9015_setup_usbids);
- }
-
- if (table) {
- props->rc_key_map = table->rc_key_map;
- props->rc_key_map_size = table->rc_key_map_size;
- af9015_config.ir_table = table->ir_table;
- af9015_config.ir_table_size = table->ir_table_size;
- }
-}
-
static int af9015_read_config(struct usb_device *udev)
{
int ret;
u8 val, i, offset = 0;
struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
+ char manufacturer[10];
/* IR remote controller */
req.addr = AF9015_EEPROM_IR_MODE;
@@ -871,17 +716,158 @@
if (ret)
goto error;
- ret = af9015_eeprom_hash(udev);
- if (ret)
- goto error;
-
deb_info("%s: IR mode:%d\n", __func__, val);
for (i = 0; i < af9015_properties_count; i++) {
if (val == AF9015_IR_MODE_DISABLED) {
af9015_properties[i].rc_key_map = NULL;
af9015_properties[i].rc_key_map_size = 0;
- } else
- af9015_set_remote_config(udev, &af9015_properties[i]);
+ } else if (dvb_usb_af9015_remote) {
+ /* load remote defined as module param */
+ switch (dvb_usb_af9015_remote) {
+ case AF9015_REMOTE_A_LINK_DTU_M:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_a_link;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_a_link);
+ af9015_config.ir_table = af9015_ir_table_a_link;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_a_link);
+ break;
+ case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_msi;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_msi);
+ af9015_config.ir_table = af9015_ir_table_msi;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_msi);
+ break;
+ case AF9015_REMOTE_MYGICTV_U718:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_mygictv;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_mygictv);
+ af9015_config.ir_table =
+ af9015_ir_table_mygictv;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_mygictv);
+ break;
+ case AF9015_REMOTE_DIGITTRADE_DVB_T:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_digittrade;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_digittrade);
+ af9015_config.ir_table =
+ af9015_ir_table_digittrade;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_digittrade);
+ break;
+ case AF9015_REMOTE_AVERMEDIA_KS:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_avermedia;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_avermedia);
+ af9015_config.ir_table =
+ af9015_ir_table_avermedia_ks;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_avermedia_ks);
+ break;
+ }
+ } else {
+ switch (le16_to_cpu(udev->descriptor.idVendor)) {
+ case USB_VID_LEADTEK:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_leadtek;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_leadtek);
+ af9015_config.ir_table =
+ af9015_ir_table_leadtek;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_leadtek);
+ break;
+ case USB_VID_VISIONPLUS:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_twinhan;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_twinhan);
+ af9015_config.ir_table =
+ af9015_ir_table_twinhan;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_twinhan);
+ break;
+ case USB_VID_KWORLD_2:
+ /* TODO: use correct rc keys */
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_twinhan;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_twinhan);
+ af9015_config.ir_table = af9015_ir_table_kworld;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_kworld);
+ break;
+ /* Check USB manufacturer and product strings and try
+ to determine correct remote in case of chip vendor
+ reference IDs are used. */
+ case USB_VID_AFATECH:
+ memset(manufacturer, 0, sizeof(manufacturer));
+ usb_string(udev, udev->descriptor.iManufacturer,
+ manufacturer, sizeof(manufacturer));
+ if (!strcmp("Geniatech", manufacturer)) {
+ /* iManufacturer 1 Geniatech
+ iProduct 2 AF9015 */
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_mygictv;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_mygictv);
+ af9015_config.ir_table =
+ af9015_ir_table_mygictv;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_mygictv);
+ } else if (!strcmp("MSI", manufacturer)) {
+ /* iManufacturer 1 MSI
+ iProduct 2 MSI K-VOX */
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_msi;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_msi);
+ af9015_config.ir_table =
+ af9015_ir_table_msi;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_msi);
+ } else if (udev->descriptor.idProduct ==
+ cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_trekstor;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_trekstor);
+ af9015_config.ir_table =
+ af9015_ir_table_trekstor;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_trekstor);
+ }
+ break;
+ case USB_VID_AVERMEDIA:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_avermedia;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_avermedia);
+ af9015_config.ir_table =
+ af9015_ir_table_avermedia;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_avermedia);
+ break;
+ case USB_VID_MSI_2:
+ af9015_properties[i].rc_key_map =
+ ir_codes_af9015_table_msi_digivox_iii;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(ir_codes_af9015_table_msi_digivox_iii);
+ af9015_config.ir_table =
+ af9015_ir_table_msi_digivox_iii;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_msi_digivox_iii);
+ break;
+ }
+ }
}
/* TS mode - one or two receivers */
@@ -992,6 +978,7 @@
case AF9013_TUNER_MT2060_2:
case AF9013_TUNER_TDA18271:
case AF9013_TUNER_QT1010A:
+ case AF9013_TUNER_TDA18218:
af9015_af9013_config[i].rf_spec_inv = 1;
break;
case AF9013_TUNER_MXL5003D:
@@ -1003,9 +990,6 @@
af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
af9015_af9013_config[i].rf_spec_inv = 1;
break;
- case AF9013_TUNER_TDA18218:
- warn("tuner NXP TDA18218 not supported yet");
- return -ENODEV;
default:
warn("tuner id:%d not supported, please report!", val);
return -ENODEV;
@@ -1208,6 +1192,10 @@
.dig_out = 1,
};
+static struct tda18218_config af9015_tda18218_config = {
+ .i2c_address = 0xc0,
+};
+
static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
{
struct af9015_state *state = adap->dev->priv;
@@ -1255,6 +1243,10 @@
ret = dvb_attach(mc44s803_attach, adap->fe, i2c_adap,
&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
break;
+ case AF9013_TUNER_TDA18218:
+ ret = dvb_attach(tda18218_attach, adap->fe, i2c_adap,
+ &af9015_tda18218_config) == NULL ? -ENODEV : 0;
+ break;
case AF9013_TUNER_UNKNOWN:
default:
ret = -ENODEV;
@@ -1299,6 +1291,7 @@
{USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)},
/* 30 */{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T)},
{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4)},
+ {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC)},
{0},
};
MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1607,8 +1600,8 @@
.warm_ids = {NULL},
},
{
- .name = "Leadtek WinFast DTV2000DS",
- .cold_ids = {&af9015_usb_table[29], NULL},
+ .name = "TerraTec Cinergy T Stick RC",
+ .cold_ids = {&af9015_usb_table[32], NULL},
.warm_ids = {NULL},
},
{
diff -Nru linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
--- linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/dvb-usb/dvb-usb-ids.h 2011-01-04 14:45:53.600000024 +0100
@@ -133,6 +133,7 @@
#define USB_PID_KWORLD_VSTREAM_WARM 0x17df
#define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055
#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069
+#define USB_PID_TERRATEC_CINERGY_T_STICK_RC 0x0097
#define USB_PID_TWINHAN_VP7041_COLD 0x3201
#define USB_PID_TWINHAN_VP7041_WARM 0x3202
#define USB_PID_TWINHAN_VP7020_COLD 0x3203
diff -Nru linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c
--- linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013.c 2011-01-04 14:48:59.535000023 +0100
@@ -487,6 +487,20 @@
break;
}
}
+ else if(state->config.tuner == AF9013_TUNER_TDA18218) {
+ switch (bw) {
+ case BANDWIDTH_6_MHZ:
+ if_sample_freq = 3000000; /* 3 MHz */
+ break;
+ case BANDWIDTH_7_MHZ:
+ if_sample_freq = 3500000; /* 3.5 MHz */
+ break;
+ case BANDWIDTH_8_MHZ:
+ default:
+ if_sample_freq = 4000000; /* 4 MHz */
+ break;
+ }
+ }
while (if_sample_freq > (adc_freq / 2))
if_sample_freq = if_sample_freq - adc_freq;
@@ -1389,6 +1403,7 @@
init = tuner_init_mt2060_2;
break;
case AF9013_TUNER_TDA18271:
+ case AF9013_TUNER_TDA18218:
len = ARRAY_SIZE(tuner_init_tda18271);
init = tuner_init_tda18271;
break;
diff -Nru linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h
--- linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h 2010-08-27 01:47:12.000000000 +0200
+++ /usr/src/linux-2.6.35.4/drivers/media/dvb/frontends/af9013_priv.h 2011-01-04 14:52:02.621000024 +0100
@@ -789,8 +789,9 @@
{ 0x9bd9, 0, 8, 0x08 },
};
-/* NXP TDA18271 tuner init
- AF9013_TUNER_TDA18271 = 156 */
+/* NXP TDA18271 & TDA18218 tuner init
+ AF9013_TUNER_TDA18271 = 156
+ AF9013_TUNER_TDA18218 = 179 */
static struct regdesc tuner_init_tda18271[] = {
{ 0x9bd5, 0, 8, 0x01 },
{ 0x9bd6, 0, 8, 0x04 },
</pre>
</pre>



Latest revision as of 17:36, 5 January 2011

Vendor
Device/Model
Supported ID on
Interface
Hardware Firmware Comment / Pictures URL E
TerraTec Cinergy T USB RC (mk II) Yes, in kernel since 2.6.37 0ccd:0097 USB2.0 Afatech AF9015A + TDA18218HN + EM24C02A dvb-usb-af9015.fw Dvb-t-usb-terratec-cinergy-T-RC-mk2-001.jpg [1] Jump to the place where you can edit this entry

Version 2 AF9015

USB ID: 0ccd:0097 Manufacturer: NEWMI

Uses tuner NXP TDA18218 and AF9015A. Use Kernel-2.6.37 or v4l-dvb git.

After loading dvb-usb-af9015 you should see the following:

usb 3-3: new high speed USB device using ehci_hcd and address 3
usb 3-3: New USB device found, idVendor=0ccd, idProduct=0097
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: USB2.0 DVB-T TV Stick
usb 3-3: Manufacturer: NEWMI
usb 3-3: SerialNumber: xxxxxxxxxxxxxx
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TerraTec Cinergy T Stick RC)
af9013: firmware version:4.95.0
DVB: registering adapter 4 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218 successfully identified.
dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1