TerraTec Cinergy T USB RC
Jump to navigation
Jump to search
| Vendor Device/Model |
Supported | ID on Interface |
Hardware | Firmware | Comment / Pictures | URL | E |
|---|---|---|---|---|---|---|---|
| TerraTec Cinergy T USB RC (mk II) | ✔ Yes, in kernel since 2.6.37 | 0ccd:0097 USB2.0 | Afatech AF9015A + TDA18218HN + EM24C02A | dvb-usb-af9015.fw | 
|
[1] | 
|
Version 2 AF9015
USB ID: 0ccd:0097 Manufacturer: NEWMI
There is a patch available to support this device: http://www.mail-archive.com/linux-media@vger.kernel.org/msg16117.html
However, this patch doesnt fit anymore perfectly on 2.6.35.4 due to some changes on IR and there is no official support in dvb-hg; so this patch needs to be adapted and applied. Testing afterwards can be done as usual, for example with tzap, scan or w_scan. Needs also firmware dvb-usb-af9015.fw.
Uses tuner NXP TDA18218, which is quite similiar to TDA18271. Preliminary support for this tuner is added with the patch above.
After applying patch and loading dvb-usb-af9015 you should see the following:
usb 3-3: new high speed USB device using ehci_hcd and address 3 usb 3-3: New USB device found, idVendor=0ccd, idProduct=0097 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: USB2.0 DVB-T TV Stick usb 3-3: Manufacturer: NEWMI usb 3-3: SerialNumber: xxxxxxxxxxxxxx dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (TerraTec Cinergy T Stick RC) af9013: firmware version:4.95.0 DVB: registering adapter 4 frontend 0 (Afatech AF9013 DVB-T)... NXP TDA18218 successfully identified. dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected. input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8 generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1