Terratec T6: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
(Contents deleted because new device page with same contents created.)
 
Line 1: Line 1:
now under [[TerraTec_T6_Dual_DVB-T_Stick]].
It consists of
* Afatech AF9035B-N2 USB Interface with included AF9033 Demodulator
* Afatech AF9033B-N2 second Demodulator
* Fitipower FC0012 Tuner (2 off)

[[File:terratec-t6-internals-front.jpg|300px|left|top side of PCB with all major chips and IR receiver]]
[[File:terratec-t6-internals-rear.jpg|300px|right|bottom side of PCB]]
<br/><br/><br/><br/><br/><br/><br/>

This device is currently not officially supported by Linux, however it is possible to get this device working using a slightly patched version of the AF9035 driver as used in [[EzCap_DVB_T_Stick]].

== Instructions how to get the stick working ==

Follow the instruction to get the AF903x source code archive '''AF903x.tar.gz''' in [[EzCap_DVB_T_Stick]].

I run kernel 3.0.1 and therefore I needed a few patched just to get the source code compiled (you may not need all of them, but they shouldn't hurt either).

--- a/src/af903x.h 2009-08-14 16:17:10.000000000 +0200
+++ b/src/af903x.h 2011-08-13 16:49:49.799506005 +0200
@@ -9,7 +9,6 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kref.h>
-#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <asm/uaccess.h>
#include "dvb-usb.h"
--- a/src/userdef.h 2009-08-14 16:17:10.000000000 +0200
+++ b/src/userdef.h 2011-08-01 22:56:02.626583791 +0200
@@ -8,7 +8,9 @@
typedef int INT; // 4 bytes
//typedef void * HANDLE;
+#ifndef NULL
#define NULL 0
+#endif
#ifdef IN
#undef IN
--- a/api/type.h 2009-08-14 16:17:10.000000000 +0200
+++ b/api/type.h 2011-08-01 22:54:38.197342415 +0200
@@ -3,6 +3,15 @@
#include "userdef.h"// for Linux
+#ifdef IN
+#undef IN
+#endif
+#ifdef OUT
+#undef OUT
+#endif
+#ifdef INOUT
+#undef INOUT
+#endif
#define IN
#define OUT
#define INOUT
--- a/api/usb2impl.c 2011-02-15 11:12:59.000000000 +0100
+++ b/api/usb2impl.c 2011-08-01 21:59:17.635389432 +0200
@@ -6,7 +6,6 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kref.h>
-#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <asm/uaccess.h>
#include <linux/device.h>

Then, here are some bug fixes to prevent deadlocks of the mutexes:

--- a/src/af903x-drv.c 2009-08-14 16:17:10.000000000 +0200
+++ b/src/af903x-drv.c 2011-08-12 21:26:10.610770606 +0200
@@ -1075,7 +1075,7 @@ DWORD DL_ApCtrl (
if(PDC->architecture != Architecture_PIP)
{
- if ( PDC->Demodulator.chipNumber == 2 && bOn) dwError = DL_NIMSuspend(PDC, false);
+ if ( PDC->Demodulator.chipNumber == 2 && bOn) dwError = DRV_NIMSuspend(PDC, false);
for (i=0; i<PDC->Demodulator.chipNumber; i++)
{
@@ -1091,7 +1091,7 @@ DWORD DL_ApCtrl (
}
}
- if(PDC->Demodulator.chipNumber == 2 && !bOn) dwError = DL_NIMSuspend(PDC, true);
+ if(PDC->Demodulator.chipNumber == 2 && !bOn) dwError = DRV_NIMSuspend(PDC, true);
}
else
{
@@ -1100,7 +1100,7 @@ DWORD DL_ApCtrl (
PDC->fc[ucSlaveDemod].GraphBuilt = 1;
if (PDC->fc[0].GraphBuilt == 0 || PDC->fc[1].GraphBuilt == 0)
- dwError = DL_NIMSuspend(PDC, false);
+ dwError = DRV_NIMSuspend(PDC, false);
dwError = DRV_ApCtrl (PDC, ucSlaveDemod, bOn);
}
@@ -1112,7 +1112,7 @@ DWORD DL_ApCtrl (
if (PDC->bTunerPowerOff != true) dwError = DRV_ApCtrl (PDC, ucSlaveDemod, bOn);
if (PDC->fc[0].GraphBuilt == 0 && PDC->fc[1].GraphBuilt == 0 && PDC->bTunerPowerOff == true)
- dwError = DL_NIMSuspend(PDC, true);
+ dwError = DRV_NIMSuspend(PDC, true);
}
}
And finally, the patches to support the TerraTec T6 Dual DVB-T stick:

--- a/src/af903x-devices.c 2009-08-14 16:17:10.000000000 +0200
+++ b/src/af903x-devices.c 2011-08-01 22:06:08.118919600 +0200
@@ -127,6 +127,7 @@ struct usb_device_id af903x_usb_id_table
{ USB_DEVICE(0x15A4,0x1002) },
{ USB_DEVICE(0x15A4,0x1003) },
{ USB_DEVICE(0x15A4,0x9035) },
+ { USB_DEVICE(0x0ccd,0x10b3) }, /* Terratec T6 */
{ 0}, /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, af903x_usb_id_table);
@@ -156,7 +157,7 @@ struct dvb_usb_device_properties af903x_
}
},
#else
- .num_adapters = 1,
+ .num_adapters = 2,
.adapter = {
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
@@ -198,13 +199,17 @@ struct dvb_usb_device_properties af903x_
},
},
#endif
- .num_device_descs =1,
+ .num_device_descs =2,
.devices = {
{ "ITEtech USB2.0 DVB-T Recevier",
{ &af903x_usb_id_table[0], &af903x_usb_id_table[1],&af903x_usb_id_table[2],
&af903x_usb_id_table[3], &af903x_usb_id_table[4], NULL},
{ NULL },
},
+ { "Terratec T6",
+ { &af903x_usb_id_table[5], NULL},
+ { NULL },
+ },
{NULL},
}
--- a/api/Fitipower_FC0012.c 2009-08-14 16:17:10.000000000 +0200
+++ b/api/Fitipower_FC0012.c 2011-08-11 22:54:23.390763425 +0200
@@ -35,6 +35,12 @@ Dword FC0012_open (
IN Byte chip
) {
Dword error = Error_NO_ERROR;
+ int i;
+ Byte reg[] = {
+ 0x05, 0x10, 0x00, 0x00, 0x0a, 0x00, 0x0f, 0xff,
+ 0x6e, 0xb8, 0x83, 0xfe, 0x02, 0x00, 0x00, 0x0d,
+ 0x00, 0x1f, 0x90, 0x00, 0x04,
+ };
/** Control tuner enable */
error = Standard_writeRegisterBits (demodulator, chip, Processor_LINK, p_reg_top_gpiot2_o, reg_top_gpiot2_o_pos, reg_top_gpiot2_o_len, 1);
@@ -47,11 +53,16 @@ Dword FC0012_open (
if (error) goto exit;
/** Control pin diode **/
- error = Standard_writeRegister (demodulator, chip, Processor_LINK, p_reg_top_gpioh8_on, 1);
+ error = Standard_writeRegister (demodulator, chip, Processor_LINK, p_reg_top_gpioh8_en, 1);
if (error) goto exit;
- error = Standard_writeRegister (demodulator, chip, Processor_LINK, p_reg_top_gpioh8_en, 1);
+ error = Standard_writeRegister (demodulator, chip, Processor_LINK, p_reg_top_gpioh8_on, 1);
if (error) goto exit;
+
+ for (i=0; i<sizeof(reg)/sizeof(reg[0]); i++) {
+ error = Standard_writeTunerRegisters (demodulator, chip, i+1, 1, &reg[i]);
+ if (error) goto exit;
+ }
exit:
return (error);
}
--- a/api/Fitipower_FC0012_Script.h 2009-08-14 16:17:10.000000000 +0200
+++ b/api/Fitipower_FC0012_Script.h 2011-08-13 16:53:41.984092888 +0200
@@ -15,7 +15,7 @@
#define VERSION4 0
-#define FC0012_ADDRESS 0xC0
+#define FC0012_ADDRESS 0xC6
#define FC0012_SCRIPTSETLENGTH 0x00000001
Word FC0012_scriptSets[] = {
--- a/api/user.h 2009-08-14 16:17:10.000000000 +0200
+++ b/api/user.h 2011-08-10 22:21:31.192856393 +0200
@@ -22,7 +22,7 @@
#define User_I2C_SPEED 0x07
/** Define I2C address of secondary chip when Diversity mode or PIP mode is active. */
-#define User_I2C_ADDRESS 0x38
+#define User_I2C_ADDRESS 0x3a
/** Define USB frame size */
#define User_USB20_MAX_PACKET_SIZE 512

After that, continue with the instructions in [[EzCap_DVB_T_Stick]].

[[Category:DVB-T USB Devices]]

Latest revision as of 16:07, 13 August 2011

now under TerraTec_T6_Dual_DVB-T_Stick.

Retrieved from "https://www.linuxtv.org/wiki/index.php?title=Terratec_T6&oldid=29431"