User talk:Indulis: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
Line 10: Line 10:


==========================================================
==========================================================
OK thanks yes rereading the specs that makes sense.... so something else on the board was not capable of passing the bandwidth required for HDTV signals (card was clearly marked SDTV ie up to 576p).
OK thanks yes rereading the specs that makes sense.... so something else on the board was not capable of passing the bandwidth required for HDTV signals (card was clearly marked SDTV ie up to 576p). The card definitely stops working above 576p! We have 720p and 1080i being transmitted here in Australia as well as 576i and 576p.

Revision as of 08:16, 15 April 2010

If you are wondering why I have (again) removed your edits about the cx2388x capture abilities, its because you are missing a point of distinction:

  • the IC is primarily an A/V decoder (i.e. it does analog to digital conversion)
  • digital tv consists of a MPEG2 Transport Stream (i.e. its already digital ... no analog to digital conversion is required)
  • in regards to digital tv, the cx2388x acts only as a bridge -- it accepts the MPEG2 TS and places it on the PCI bus
  • the capture window that you keep referencing is STRICTLY in regards to an analog signal ... this does NOT apply to a digital TV signal
  • that last point leads me to believe that you are confusing a compressed format decoder, such as a MPEG2 decoder vs. an A/V decoder ... they are NOT the same thing

hope that helps clarify

==============================================

OK thanks yes rereading the specs that makes sense.... so something else on the board was not capable of passing the bandwidth required for HDTV signals (card was clearly marked SDTV ie up to 576p). The card definitely stops working above 576p! We have 720p and 1080i being transmitted here in Australia as well as 576i and 576p.