V4L TV Viewing

The following provides commands for adjusting common V4L configuration settings for watching analogue TV.

Common configuration and control commands

1. v4l2ucp -- universal control panel for v4l2 devices (available for Debian from Marillat)

2. Command-line control of the TV card

• v4lctl -c /dev/video1 list
• v4lctl setnorm ntsc-m
• v4lctl setfreqtab us-cable
• v4lctl setfreqtab us-bcast
• v4lctl setchannel 3
• v4lctl volume mute off
• v4lctl volume 100
• v4lctl audio stereo
• v4lctl -c /dev/video0 setattr 'chroma agc' on (bttv only)
• v4lctl -c /dev/video0 hue "100%" (or "0%" -- same thing)
• v4lctl -c /dev/video1 bright "50%"
• v4lctl -c /dev/video2 contrast "45%"
• v4lctl -c /dev/video0 color "50%"

3. Test the video

• xawtv -hwscan
• xawtv -remote -noxv -c /dev/video0 -vbidev /dev/vbi0

4. Test overlay mode (capture card controls display -- easy on CPU)

• xawtv -noxv -capture overlay
• xawtv -v4l1 -capture overlay
• xawtv -xvtv -capture overlay
• xawtv -xvtv_overlay on -capture overlay
• xawtv -xvtv_overlay off -capture overlay

5. Test grabdisplay mode (application controls display -- required for deinterlacing and other effects)

• xawtv -noxv -capture grabdisplay
• xawtv -v4l1 -capture grabdisplay
• xawtv -xvtv -capture grabdisplay
• xawtv -xvtv_overlay on -capture grabdisplay
• xawtv -xvtv_overlay off -capture grabdisplay

6. Test streamer

• streamer -i "S-Video Input"

7. Determine the characteristics of a recorded video file

• mplayer -vo dummy -identify <filename> 2>&1 | grep -E "VIDEO:|AUDIO:"

You can put this into a script and for instance call it reveal:

mplayer -vo dummy -identify $1 2>&1 | grep -E "VIDEO:|AUDIO:"

Now you can issue "reveal <filename>" and see something like this:

VIDEO:  [h264]  576x432  24bpp  29.970 fps  495.5 kbps (60.5 kbyte/s)
AUDIO: 32000 Hz, 2 ch, s16le, 64.0 kbit/6.25% (ratio: 8000->128000)

This command also gives you details:

• tcprobe -i <filename>

However, at this point (transcode 1.0.2) it doesn't show you video bitrates.