--- dvb-kernel/README	2002/12/20 07:00:44	1.2
+++ dvb-kernel/README	2002/12/29 22:15:53	1.3
@@ -3,7 +3,7 @@ Instructions for building the "new" driv
 
 (This won't work with *2.4.x*, so don't even try...)
 
-You need a kernel >= 2.5.52.
+You need a kernel >= 2.5.53.
 
 0) Some changes are already disucussed with Gerd Knorr, but have
 not been applied to the main kernel tree.
@@ -18,28 +18,25 @@ kernel tree before configuring and build
 driver files to your kernel.
 
 2) Next, use "make menuconfig" or whatever and select the av7110 driver.
-It should be build as a module, static compilation is untested.
-
-Unfortunately, you have also select
-"Character Devices->I2C support->I2C support",
-otherwise the saa7146 driver will not be build. 
-
-We are working on a solution for that.
+If you have problems with modules and 2.5.x you can also compile the driver
+statically into the kernel.
 
 Build and install the new kernel as usual.
 
 3) For your convenience, a script called "driver.av7110" is available
-to load and unload the driver easily.
+to load and unload the driver easily. (Of course this is only valid if you
+compiled the driver as a module...)
 
 Use "./driver.av7110 start" to start the driver, "./driver.av7110 stop" to
-stop and unload it.
+stop and unload it. ("./driver.av7110 restart" unloads the driver and loads 
+the driver with all debugging options enabled)
 
 4) Try your favourite programs, the behaviour should be exactly the same.
 Good luck!
 
 If you have problems or questions:
 
-1) Look at the ../dvb-kernel/TODO file. If the problem is mentionend there,
+1) Look at the TODO file. If the problem is mentionend there,
 it will be fixed asap.
 
 2) Ask on the mailing list or mail me at <michael@mihu.de>