--- dvb-kernel/README	2002/12/29 22:15:53	1.3
+++ dvb-kernel/README	2003/01/06 08:05:27	1.4
@@ -1,7 +1,8 @@
 Instructions for building the "new" driver under 2.5.x:
 -------------------------------------------------------
 
-(This won't work with *2.4.x*, so don't even try...)
+(This won't work with *2.4.x*, so don't even try, have a look
+at the build-2.4 directory instead)
 
 You need a kernel >= 2.5.53.
 
@@ -23,6 +24,17 @@ statically into the kernel.
 
 Build and install the new kernel as usual.
 
+If you copy an old ".config" from an older kernel version where you already
+selected the av7110 driver, some dependencies are not set up correctly and the 
+driver won't be build completely. 
+
+You need to delete everything between the 
+> # Supported SAA7146 based PCI Adapters
+and
+> # File systems
+line in your ".config", then run "make oldconfig". You will be asked about
+these devices again, and the dependencies are set correctly.
+
 3) For your convenience, a script called "driver.av7110" is available
 to load and unload the driver easily. (Of course this is only valid if you
 compiled the driver as a module...)
@@ -39,6 +51,13 @@ If you have problems or questions:
 1) Look at the TODO file. If the problem is mentionend there,
 it will be fixed asap.
 
-2) Ask on the mailing list or mail me at <michael@mihu.de>
+2) Ask on the mailing list. If you choose to do so, please include the
+following informations:
+
+- Do you really use the "dvb-kernel" driver?
+- When did you check out the driver?
+- Which kernel version are using?
+- Which card do you have? (Name, board revision, frontend type, ...)
+- What are the problems exactly?
 
 Michael Hunold.