[linux-dvb] CAM problems...

[Gregoire Favre <greg@ulima.unil.ch>]

Hello,

I have some kind of problems with CAMs...
With an older CVS (that cam out about with ac17) I got the following
errors
:Feb 24 23:12:07 localhost kernel: saa7146_core.o: saa7146(1):
bus:0, rev:1, mem:0xd29bb000.
Feb 24 23:12:07 localhost kernel: VES1893: attaching VES1893 at 0x10 to
adapter saa7146(1)
Feb 24 23:12:10 localhost kernel: dvb: ARM firmware successfully loaded.
Feb 24 23:12:11 localhost kernel: dvb: firmware = f0240009
Feb 24 23:12:11 localhost kernel: dvb: MAC = 00 d0 5c 00 41 90 
Feb 24 23:12:11 localhost kernel: dvb: 1 dvb(s) found!
Feb 24 23:12:11 localhost kernel: tuner: chip found @ 0x61
Feb 24 23:12:12 localhost kernel: outcommand error 1
Feb 24 23:12:15 localhost last message repeated 2 times
Feb 24 23:12:16 localhost kernel: dvb: ARM RESET

And I got ARM RESET repeated ad nauseam... The only things I can do is
to use Magic SysRq (E, then S, U and finally B).

And if I don't have that message, it's working.

With the latest DVD (just checked right now...) I have never succeeded
in using my cams:
Feb 24 17:40:56 localhost kernel: i2c-core.o: i2c core module
Feb 24 17:40:56 localhost kernel: Linux video capture interface: v1.00
Feb 24 17:40:56 localhost kernel: i2c-core.o: driver i2c TV tuner driver
registered.
Feb 24 17:40:56 localhost kernel: i2c-core.o: driver VES1893 DVB DECODER
registered.
Feb 24 17:40:56 localhost kernel: i2c-core.o: driver VES1820 DVB DECODER
registered.
Feb 24 17:40:56 localhost kernel: saa7146_core.o: saa7146(1): bus:0,
rev:1, mem:0xd29b6000.
Feb 24 17:40:57 localhost kernel: tuner: chip found @ 0x61
Feb 24 17:40:57 localhost kernel: i2c-core.o: client [i2c tv tuner chip]
registered to adapter [saa7146(1)](pos. 0).
Feb 24 17:40:57 localhost kernel: i2c-core.o: client [VES1893]
registered to adapter [saa7146(1)](pos. 1).
Feb 24 17:40:57 localhost kernel: VES1893: attaching VES1893 at 0x10 to
adapter saa7146(1)
Feb 24 17:40:57 localhost kernel: i2c-core.o: adapter saa7146(1)
registered as adapter 0.
Feb 24 17:41:00 localhost kernel: dvb: firmware = f0240009
Feb 24 17:41:00 localhost kernel: dvb: MAC = 00 d0 5c 00 41 90 
Feb 24 17:41:00 localhost kernel: function : dvbdmx_connect_frontend
Feb 24 17:41:03 localhost kernel: dvb: IRQ_RX=0
Feb 24 17:41:03 localhost kernel: dvb: 1 dvb(s) found!
Feb 24 17:41:03 localhost bttv: sync

And as I launch vdr, my system hangs... some times and some times just
keep alive...

Feb 24 22:57:56 localhost kernel: 01 02 01 00 56 69 61 63 63 65 73 73 00
03   Viaccess  
Feb 24 22:58:21 localhost vdr[1533]: VDR version 0.71 started
Feb 24 22:58:21 localhost vdr[1533]: loading /video/setup.conf
Feb 24 22:58:21 localhost vdr[1533]: loading /video/channels.conf
Feb 24 22:58:21 localhost vdr[1533]: loading /video/timers.conf
Feb 24 22:58:21 localhost vdr[1533]: loading /video/keys-pc.conf
Feb 24 22:58:21 localhost vdr[1533]: probing /dev/video0
Feb 24 22:58:22 localhost vdr[1535]: EIT processing thread started
(pid=1535) - master
Feb 24 22:58:22 localhost vdr[1533]: probing /dev/video1
Feb 24 22:58:22 localhost vdr[1533]: ERROR: /dev/video1: Device or
resource busy
Feb 24 22:58:22 localhost vdr[1533]: found 1 video device
Feb 24 22:58:22 localhost vdr[1533]: setting primary DVB to 1
Feb 24 22:58:22 localhost vdr[1533]: switching to channel 615
Feb 24 22:58:23 localhost kernel: commandrequest error
Feb 24 22:58:23 localhost kernel: dvb: filter shutdown error :49151
Feb 24 22:58:24 localhost kernel: outcommand error 1
Feb 24 22:58:24 localhost kernel: dvb: ARM RESET
Feb 24 22:58:37 localhost kernel: commandrequest error

The 2 lines just repeat a hudge number of times...

Is there something I could try to solve that problem?
Do I am the only one with that problem, I use latest kernel (with the
latest CVS, it's 2.4.2-ac2, I haven't tried ac3) and egcs-2.91.66 to
compil everything.

Without the CAM, every thing works just great ;-)

Thanks you very much,

	Greg
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch


--- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.