[linux-dvb] Re: problems vdr0.71 dvb0.9

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Johannes Schoeller wrote:
>
> hi klaus!
>
> another problem. :)
> when i load the dvb0.9 driver, and then start
> your "runvdr" i get the following output:
> 
> Mar 11 16:36:07 vdr kernel: dvb: 1 dvb(s) released properly.
> Mar 11 16:36:10 vdr kernel: dvb: AV7110  firm f0240009, rtsl b0250014, vid
> 00010065, app 01010000
> Mar 11 16:36:11 vdr kernel: dvb: IRQ_RX=0
> Mar 11 16:36:11 vdr kernel: dvb: 1 dvb(s) found!
> Mar 11 16:36:14 vdr vdr[1630]: VDR version 0.71 started
> Mar 11 16:36:14 vdr vdr[1630]: loading /video/setup.conf
> Mar 11 16:36:14 vdr vdr[1630]: loading /video/channels.conf
> Mar 11 16:36:14 vdr vdr[1630]: loading /video/timers.conf
> Mar 11 16:36:14 vdr vdr[1630]: loading /video/commands.conf
> Mar 11 16:36:14 vdr vdr[1630]: ERROR: no video device found, giving up!
> Mar 11 16:36:25 vdr kernel: dvb: 1 dvb(s) released properly.
> Mar 11 16:36:27 vdr kernel: dvb: AV7110  firm f0240009, rtsl b0250014, vid
> 00010065, app 01010000
> Mar 11 16:36:28 vdr kernel: dvb: IRQ_RX=0
> Mar 11 16:36:28 vdr kernel: dvb: 1 dvb(s) found!
> Mar 11 16:36:31 vdr vdr[1662]: VDR version 0.71 started
> Mar 11 16:36:31 vdr vdr[1662]: loading /video/setup.conf
> Mar 11 16:36:31 vdr vdr[1662]: loading /video/channels.conf
> Mar 11 16:36:31 vdr vdr[1662]: loading /video/timers.conf
> Mar 11 16:36:31 vdr vdr[1662]: loading /video/commands.conf
> Mar 11 16:36:31 vdr vdr[1662]: ERROR: no video device found, giving up!
> 
> sometimes also:
> 
> Mar 11 16:33:18 vdr modprobe: modprobe: Can't locate module char-major-81-1
> 
> btw: (if you look at time) local time during writing is 14:42. :))
> 
> loading VDR with dvb0.8.2 works fine. have i forgotten to
> load some modules, or what else. i don.t understand this... ;)
> 
> pls help someone!!

I'm not (yet) using the 0-9 driver (still have to switch to kernel 2.4).

I'm not sure if the 0-9 driver still supports the "old" API, or whether
they have already dropped parts or all of it. VDR currently still needs
the old API to work.

Do you have a "/dev/video0", and if so, can you 'cat /dev/video0 > filename'
and 'cat filename > /dev/video0'?

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


--- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.