[linux-dvb] Help with mrouted needed

[Todor Chaushev <todor@www.com>]

Hi, to all
when I started mrouted -c /etc/mrouted.conf -d 3
result this:

debug level 3
14:51:26.401 mrouted version 3.8
14:51:26.406 Getting vifs from kernel interfaces
14:51:26.407 installing eth0 (194.141.27.121 on subnet 194.141.27.0/25) as vif #0 - rate=0
14:51:26.407 installing eth0:0 (192.168.2.200 on subnet 192.168.2/24) as vif #1- rate=0
14:51:26.407 installing dvb0 (192.168.4.1 on subnet 192.168.4/24) as vif #2 - rate=0
14:51:26.408 Getting vifs from /etc/mrouted.conf
14:51:26.408 warning - /etc/mrouted.conf: Extra subnet 125.0.0.0/1 has host bits set near line 34
14:51:26.409 Installing vifs in mrouted...
14:51:26.409 vif #0, phyint 194.141.27.121
14:51:26.409 CLR0 */0 c28d1b00

14:51:26.410 SET 1/0 c28d1b00

14:51:26.410 SET 2/0 c28d1b00

14:51:26.411 SENT membership query   from 194.141.27.121  to 224.0.0.1
14:51:26.411 vif #1, phyint 192.168.2.200
14:51:26.411 CLR0 */1 c0a80200

14:51:26.412 SET 0/1 c0a80200

14:51:26.425 SET 2/1 c0a80200

14:51:26.426 SENT membership query   from 192.168.2.200   to 224.0.0.1
14:51:26.426 vif #2, phyint 192.168.4.1
14:51:26.426 CLR0 */2 c0a80400

14:51:26.427 SET 0/2 c0a80400

14:51:26.427 SET 1/2 c0a80400
 
14:51:26.428 CLR0 */2 00000000
 
14:51:26.428 SET 0/2 00000000
 
14:51:26.428 SET 1/2 00000000
 
14:51:26.429 CLR0 */2 80000000
 
14:51:26.429 SET 0/2 80000000
 
14:51:26.429 SET 1/2 80000000
 
14:51:26.430 SENT membership query   from 192.168.4.1     to 224.0.0.1
pruning off
dvbauto on
14:51:26.451 Installing vifs in kernel...
14:51:26.451 vif #0, phyint 194.141.27.121
14:51:26.451 vif #1, phyint 192.168.2.200
14:51:26.452 setsockopt MRT_ADD_VIF: Address already in use  

;-((

Any ideas?

------------------------------------------------------------
WWW.COM - Where the Web Begins! http://www.www.com




--- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.