Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] Re: outcommand error 1 and ARM RESET
>Ralph Metzler wrote:
>
>> Hans-Peter Raschke writes:
>> > Hello,
>> >
>> > Ralph Metzler wrote:
>> > >
>> > > Hi,
>> > >
>> > > Raymond Lohuis writes:
>> > > > Hello,
>> > > >
>> > > > My name is Raymond Lohuis and i did build the VDR/DVB box too.
>> > > >
>> > > > It works fine accept when i insert an CI Module to watch encrypted
>> > > > channels.
>> > > > i get the massage :
>> > > >
>> > > > outcommand error 1
>> > > > commandrequest errorr
>> > > > Filter shutdown error :51500
>> > > >
>> > > > followed by:
>> > > >
>> > > > outcommand error 1
>> > > > ARM reset
>> > > >
>> > > > When i pull te ci module out the system works fine again.
>> > > >
>> > > > my hardware is : PII 350 128mb 30 Gb
>> > > > 3c905 ctx network / Matrox g200 AGP
>> > > > kernel 2.4.2 with reiserfs
>> > > >
>> > > > the CI card is Aston 1.05 and 1.04 (both new and repeatedly tested)
>> > > >
>> > > > Anny help would be appreciated.
>> > >
>> > > It looks like those CI-CAM versions make the ARM application crash.
>> > > I think somebody reported the same happens with the newer Irdeto
>> > > CAMs. Sorry, I do not have the hardware (CAMs) to debug this.
>> > >
>> > > Does the error already occur if just the CAM is inserted or only if
>> > > also the smartcard is inserted?
>> > >
>> > > Ralph
>> >
>> > this error occurs during normal operation on my System. Inserting the
>> > smartcard or CI module produced no error. I am not sure, if it is
>> > related to the CAM-Module. It appears mostly when a recording (of an
>> > encrypted channel) has been started. But now I will try if this error
>> > appears only with encrypted channels.
>>
>> The outcommand errors just indicate that the ARM is no longer
>> responding (it crashed) but do not tell you why.
>> If it always crashes when the CAM is inserted it is of course obvious
>> that one bug is somewhere in the CI code. This could be something as simple
>> as an overflow when parsing a new previously unknown CIS or something more
>> complicated. I'll have to see what happens when I get such a CAM.
>>
>> The crashes you have can be related to other bugs in the ARM application.
>>
>> So far I read that the following CAMs are causing instant crashes:
>>
>> Aston version 1.04 and 1.05
>> Irdeto version 4.7
>>
>> Can somebody confirm this?
>> What about other CAMs like the new EuroCIs?
>>
>> Ralph
>>
>
> Conax CAM not causing crashes, but it is not working. After inserting CAM also FTA
>channels are
> "Freezed" , after taking out the CAM all goes to normal without resetting ARM. It looks
>like ARM CI
> code not correctly initializes Conax ???
>
>Arvo
>
I use (two weeks) a very new Irdeto 4.7 CI and have no such problems you discribed.
---
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.
Home |
Main Index |
Thread Index