[linux-dvb] Re: ?:My DVB Card

["Dr. Werner Fink" <werner@suse.de>]

On Fri, Aug 10, 2001 at 12:44:00AM +0200, Rainer Zocholl wrote:
> >For those who want to buy an old TechniSat SkyStar 1 card:
> >it seems that Reichelt (www.reichelt.de) has some of this
> >older cards around, see article number `SKYSTAR 1' for
> >398 Deutsch Marks.
> >This card has AFAIK the J2 header on which RGB/SPDIF(LPCM
> >only)/S-Video are available (if configured within the DVB driver).
> 
> Jepp.
> 
> J2 is in "place" but , 
> 
>  - Receiver (BSRU6-502A) has only one F-plug (no LNB-loop thru)
>    (Not really a problem)

The card I've got from reichelt has a LNB-loop through.

> 
>  - the right plug for "CD-Out" is missing!

See http://www.lindy.cc/local/LinuxDVB.nsf/e95ed8396fac68cfc1256a010064762b/f50a46f693a7e5b6c1256a0300654f91?OpenDocument

> 
>  - The board revision seems to be "Sat-DVB Rev.: 1.5" (partly 
>    covered by label) and "TT2000.8".
> 
>  - The sound chip is not a TMS320AD80C.
>    It is a "CS4341-KS EP" in 16 Pin DIL ( SOJ SMD)
>    CS4341: 24-Bit, 96 kHz Stereo DAC with Volume Control
>    http://www.cirrus.com/design/products/overview/index.cfm?ProductID=36
>    http://www.cirrus.com/pubs/4341.pdf?DocumentID=45
> 
> 
> The video is OK, but currently i can't get a sound from
> 
> my fault?
> 
> 
> 
> 
> >BTW: Does anybody know what the other J8 header besides the CI
> >interface is good for?
> 
> 
> The soldered holes partly hidden under the bar code label are
> very likely to be the JTAG-Connectors for the TMX320AV7111's 
> emulator probe... ;-)

Hmmm ... on my card there is a connector not only some solder points.

> 
> Funny:
> The TMS320AV71xx is obsoleted by TI since 1999!
> Can someone explain this?
> (That's why only prelimary "TMX" can be found.)


         Werner


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.