Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[linux-dvb] Re: 2.4.9 + 0.9.latest - results
Andrei Loukinykh a écrit :
> To be honest, no results :(
>
> Modules are get loaded successfully, i2c and videodev are in kernel.
> Net device is open. dvb0_0 is up with :
> dvb0_0 Link encap:Ethernet HWaddr 00:01:C3:05:03:A1
> inet addr:192.168.4.1 Bcast:192.168.4.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:4096 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> HWaddress I calculated from my real IP address.
> So I did "echo 0 > /proc/sys/net/ipv4/conf/dvb0_0/rp_filter".
> I' m sending packets to proxy.114.europeonline.net ( because 2 days ago
> under Win98 it worked well with 144 transponder) from Netscape (to the
> port 8080) or just ping the same address.
>
> No responses on dvb0_0 at all.
> ( sound is playing, stations are switched well by ntuxzap )
>
> May be I should ( by what means? ) to configure my SkeStar1 tuner with
> the appropriate settings as it did dvbd before:
> power, symbolrate, frequency, ttk etc. ?
I'm going to try again dvbd3 (with 2.2.17 and driver 0.8.2)
this evening, let me know if that work for you.
But I have dvb0 in place of dvb0_0.
Pierre.
--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.
Home |
Main Index |
Thread Index