[linux-dvb] Re: probs w. two different DVBs cards

[Clemens Kirchgatterer <clemens@root.at>]

Andreas Steinhauser wrote:
> 
> I have two DVBs cards, a 1.3 and a 2.1.
> The 2.1 is physicaliy the first and the 1.3 is the second card at the PCI
> bus. The 1.3 has a CI/CAM connected.
> If I configure the 1.3 (physically the second) as the primary in
> /video/setup.conf , and then
> press record, the recording is starting on the secondary (phsically the
> first) with ist correct, but the video on the primary freezes. I can
> switch channels on the primary and the onscreen menu showes the channel
> info, but the video keeps freezed.
> Playing an recorded video with the primary (remember:physically the
> second) works fine, but by stopping the playback the channel switches to
> n-tv. Switching the channel now has no effect but shows the correct
> (swithched) onscreen  menu. The channel is still n-tv.
> The recorded video is ok.
> No error message is found in log.
> 
> Next experiment:
> configuring the physically first card (2.1) as primary and (what wonder)
> the second (1.3) as secondary, recording a video works fine at the second
> card. I can use the first for switching channels or replaying a recorded
> video. But using fast forward now brings the following error message:

first of all i would try different pci slots. sometimes such errror
turned out to be irq related!

best regards ...
clemens


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.