[linux-dvb] Re: ERROR: attempt to set channel without DVB-S

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Ewald Maier wrote:
> 
> On Wed, 26 Sep 2001 15:28:59 +0200, you wrote:
> perhaps the beginning of this is important too:
> ---------------------------------------
> Sep 26 14:48:57 linux syslogd 1.3-3: restart.
> Sep 26 14:49:00 linux kernel: klogd 1.3-3, log source = /proc/kmsg
> started.
> Sep 26 14:49:00 linux kernel: Inspecting /boot/System.map-2.4.4-4GB
> Sep 26 14:49:01 linux kernel: Loaded 10917 symbols from
> /boot/System.map-2.4.4-4GB.
> Sep 26 14:49:01 linux kernel: Symbols match kernel version 2.4.4.
> Sep 26 14:49:01 linux kernel: Loaded 213 symbols from 3 modules.
> Sep 26 14:49:01 linux kernel: ip_conntrack (512 buckets, 4096 max)
> Sep 26 14:49:01 linux kernel: IPv6 v0.8 for NET4.0
> Sep 26 14:49:01 linux kernel: IPv6 over IPv4 tunneling driver
> Sep 26 14:49:03 linux /usr/sbin/cron[384]: (CRON) STARTUP (fork ok)
> Sep 26 14:49:07 linux kernel: isapnp: Scanning for PnP cards...
> Sep 26 14:49:07 linux kernel: isapnp: No Plug & Play device found
> Sep 26 14:49:17 linux kernel: i2c-core.o: i2c core module
> Sep 26 14:49:17 linux kernel: Linux video capture interface: v1.00
> Sep 26 14:49:17 linux kernel: i2c-core.o: driver VES1893 DVB
> demodulator registered.
> Sep 26 14:49:18 linux kernel: i2c-core.o: driver VES1820 DVB
> demodulator registered.
> Sep 26 14:49:18 linux kernel: i2c-core.o: driver L64781 DVB
> demodulator registered.
> Sep 26 14:49:18 linux kernel: L64781: init done
> Sep 26 14:49:18 linux kernel: i2c-core.o: driver tda8083 DVB
> demodulator registered.
> Sep 26 14:49:18 linux kernel: i2c-core.o: driver stv0299 DVB
> demodulator registered.
> Sep 26 14:49:18 linux kernel: i2c-core.o: driver i2c TV tuner driver
> registered.
> Sep 26 14:49:18 linux kernel: saa7146_core.o: saa7146(1): bus:0,
> rev:1, mem:0xc4e47000.
> Sep 26 14:49:18 linux kernel: i2c-core.o: client [VES1893] registered
> to adapter [saa7146(1)](pos. 0).
> Sep 26 14:49:18 linux kernel: VES1893: attaching VES1893 at 0x10 to
> adapter saa7146(1)
> Sep 26 14:49:18 linux kernel: tuner: chip found @ 0x61
> Sep 26 14:49:18 linux kernel: i2c-core.o: client [i2c tv tuner chip]
> registered to adapter [saa7146(1)](pos. 1).
> Sep 26 14:49:19 linux kernel: i2c-core.o: adapter saa7146(1)
> registered as adapter 0.
> Sep 26 14:49:19 linux kernel: mon_current=c3ada000
> Sep 26 14:49:21 linux kernel: dvb0: AV7110 - firm f0240009, rtsl
> b0250018, vid 71010068, app 00010002
> Sep 26 14:49:21 linux kernel: dvb: 1 dvb(s) found!
> Sep 26 14:49:22 linux su: (to root) root on /dev/console
> Sep 26 14:49:22 linux PAM-unix2[605]: session started for user root,
> service su
> Sep 26 14:49:22 linux vdr[606]: VDR version 0.94 started
> Sep 26 14:49:22 linux vdr[606]: loading /video/setup.conf
> Sep 26 14:49:22 linux vdr[606]: loading /video/channels.conf
> Sep 26 14:49:22 linux vdr[606]: probing /dev/ost/qpskfe0
> Sep 26 14:49:22 linux vdr[606]: ERROR: /dev/ost/demux0: Device or
> resource busy
> Sep 26 14:49:22 linux last message repeated 5 times
> Sep 26 14:49:22 linux vdr[606]: ERROR (dvbapi.c,3003): Bad file
> descriptor
> Sep 26 14:49:22 linux vdr[606]: ERROR: can't open video device 0
> Sep 26 14:49:22 linux vdr[606]: probing /dev/ost/qpskfe1
> Sep 26 14:49:22 linux vdr[606]: ERROR: /dev/ost/demux1: Device or
> resource busy
> Sep 26 14:49:22 linux last message repeated 5 times
> Sep 26 14:49:23 linux modprobe: modprobe: Can't locate module
> char-major-81-1
> Sep 26 14:49:23 linux vdr[606]: ERROR (dvbapi.c,3003): Bad file
> descriptor
> Sep 26 14:49:23 linux vdr[606]: ERROR: can't open video device 1
> Sep 26 14:49:23 linux vdr[606]: probing /dev/ost/qpskfe2
> Sep 26 14:49:23 linux vdr[606]: ERROR: /dev/ost/demux2: Device or
> resource busy
> Sep 26 14:49:23 linux last message repeated 5 times
> Sep 26 14:49:23 linux modprobe: modprobe: Can't locate module
> char-major-81-2
> Sep 26 14:49:23 linux vdr[606]: ERROR (dvbapi.c,3003): Bad file
> descriptor
> Sep 26 14:49:23 linux vdr[606]: ERROR: can't open video device 2
> Sep 26 14:49:23 linux vdr[606]: found 3 video devices
> Sep 26 14:49:23 linux vdr[606]: setting primary DVB to 1
> Sep 26 14:49:23 linux vdr[606]: switching to channel 1
> Sep 26 14:49:23 linux vdr[606]: ERROR (dvbapi.c,3009): Bad file
> descriptor
> Sep 26 14:49:23 linux last message repeated 5 times
> Sep 26 14:49:23 linux vdr[606]: ERROR (dvbapi.c,3148): Unknown error
> 515
> Sep 26 14:49:28 linux vdr[606]: ERROR: timeout while tuning
> Sep 26 14:49:28 linux vdr[606]: ERROR: channel 1 not sync'ed on DVB
> card 1!
> Sep 26 14:49:28 linux vdr[606]: panic level: 0
> Sep 26 14:49:28 linux vdr[606]: retrying
> Sep 26 14:49:28 linux vdr[606]: ERROR (dvbapi.c,3009): Bad file
> descriptor
> Sep 26 14:49:28 linux last message repeated 5 times
> Sep 26 14:49:28 linux vdr[606]: ERROR (dvbapi.c,3148): Unknown error
> 515
> Sep 26 14:49:33 linux vdr[606]: ERROR: timeout while tuning
> Sep 26 14:49:33 linux vdr[606]: ERROR: channel 1 not sync'ed on DVB
> card 1!
> Sep 26 14:49:33 linux vdr[606]: panic level: 0
> Sep 26 14:49:33 linux vdr[606]: retrying
> Sep 26 14:49:33 linux vdr[606]: ERROR (dvbapi.c,3009): Bad file
> descriptor
> Sep 26 14:49:33 linux last message repeated 5 times
> Sep 26 14:49:33 linux vdr[606]: ERROR (dvbapi.c,3148): Unknown error
> 515
> Sep 26 14:49:38 linux vdr[606]: ERROR: timeout while tuning
> Sep 26 14:49:38 linux vdr[606]: ERROR: channel 1 not sync'ed on DVB
> card 1!
> Sep 26 14:49:38 linux vdr[606]: panic level: 0
> Sep 26 14:49:38 linux vdr[606]: retrying
> Sep 26 14:49:38 linux vdr[611]: LIRC remote control thread started
> (pid=611)
> Sep 26 14:49:38 linux vdr[606]: SVDRP listening on port 2001
> Sep 26 14:49:38 linux vdr[606]: setting watchdog timer to 60 seconds
> Sep 26 14:49:38 linux vdr[606]: ERROR: illegal video device handle
> (-1)!
> Sep 26 14:49:39 linux kernel: lirc_serial: auto-detected active high
> receiver
> Sep 26 14:49:43 linux vdr[606]: assuming manual start of VDR
> Sep 26 14:49:44 linux vdr[606]: max. latency time 1 seconds
> Sep 26 14:50:39 linux vdr[606]: ERROR (dvbapi.c,3009): Bad file
> descriptor
> Sep 26 14:50:39 linux last message repeated 5 times
> Sep 26 14:50:39 linux vdr[606]: ERROR: attempt to set channel without
> DVB-S or DVB-C device
> Sep 26 14:50:39 linux vdr[606]: retrying
> Sep 26 14:50:39 linux vdr[606]: ERROR (dvbapi.c,3009): Bad file
> descriptor
> Sep 26 14:50:39 linux last message repeated 5 times
> Sep 26 14:50:39 linux vdr[606]: ERROR: attempt to set channel without
> DVB-S or DVB-C device
> Sep 26 14:50:39 linux vdr[606]: retrying
> 
> CIAO
> Ewald

Apparently you are using the latest driver version, but not the latest
VDR version. Please get the latest VDR version and try again.

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.