[linux-dvb] Re: second DVB-s not used anymore

[benjamin.harling@t-online.de (Benjamin Harling)]

Hi Klaus,

I did check the PrimaryDVB line. first I tried to set it to the second card
through vdr, result: the OSD went away (probably to the second card .-)
Then I set this line directly in the setup.conf-file to no avail, I even
tried to set it to "0".

The funny thing is that I couldn't back up to a working system with vdr094
and the older driver version which worked ok before. This leads me to the
impression that there must be something which had been reconfigured
hardware-wise like PCI-interrupts or so. I have no idea - anybody?

Thanks anyway and I try the 096 with the latest driver.

And by the way, thank you for making this possible at all. That goes equally
to the Metzler-brothers and to anybody who has contributed to this project,
thanks.

bye, Benjamin


-- 
Benjamin Harling

mailto:benjamin.harling@web.de

Telefon (0531) 52255 * Telefax (0531) 2506787

> Von: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>
> Organisation: CadSoft Computer GmbH
> Datum: Wed, 26 Sep 2001 23:05:03 +0200
> An: linux-dvb@linuxtv.org
> Betreff: [linux-dvb] Re: second DVB-s not used anymore
> 
> Benjamin Harling wrote:
>> 
>> hi,
>> 
>> lately I installed vdr.0.9.5 with driver from 20010923.
>> 
>> Before I had vdr.0.9.4 with driver 20010822.
>> 
>> Equipment is a 350 MHz K6-II with one Hauppauge DVB-S and one NOVA-Card.
>> Everything worked well up until I installed 0.9.5 with driver 20010923. From
>> then on the NOVA-Card was still recognized but not used anymore. No more
>> timeshift (which worked pretty good before) and other usefull stuff.
>> 
>> I backed up to the previous configuration to no avail.
>> Sep 24 21:21:37 amun vdr[631]: probing /dev/ost/qpskfe1
>> Sep 24 21:21:37 amun vdr[631]: ERROR (dvbapi.c,3003): Bad file descriptor
>> Sep 24 21:21:37 amun vdr[634]: EIT processing thread started (pid=634)
>> Sep 24 21:21:38 amun vdr[631]: probing /dev/ost/qpskfe2
>> Sep 24 21:21:38 amun vdr[631]: probing /dev/ost/qamfe2
>> Sep 24 21:21:38 amun vdr[631]: found 2 video devices
>> Sep 24 21:21:38 amun vdr[631]: invalid DVB interface: 0
> 
> For some reason your "primary interface" setting appears to have been broken.
> Please check the line
> 
> PrimaryDVB = X
> 
> in your 'setup.conf'. If X is not '1' or '2', then please delete that line
> and try running VDR again.
> > 
> You might also want to try the latest CVS driver version together with VDR
> version 0.96.
> 
> Klaus
> -- 
> _______________________________________________________________
> 
> Klaus Schmidinger                       Phone: +49-8635-6989-10
> CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
> Hofmark 2                               Email:   kls@cadsoft.de
> D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
> _______________________________________________________________
> 
> 
> --
> Info:
> To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb"
> as subject.
> 



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.