[linux-dvb] Hauppauge WinTV DVB-c Card cannot use in linux

["wong hermit" <hermitcranecn@msn.com>]

Dear All
      I got a Hauppauge WinTV DVB-c card. The dvb drive in linuxtv.org said that it support this type card.
But i always got error messages in /var/log/messages(which list below) when i load drivers, and dvb.o report "init_module : No such device".

Jun 20 15:01:32 hermit kernel: i2c-core.o: i2c core module
Jun 20 15:01:33 hermit kernel: Linux video capture interface: v1.00
Jun 20 15:01:33 hermit kernel: i2c-core.o: driver VES1893 DVB demodulator registered.
Jun 20 15:01:33 hermit kernel: i2c-core.o: driver VES1820 DVB demodulator registered.
Jun 20 15:01:33 hermit kernel: i2c-core.o: driver L64781 DVB demodulator registered.
Jun 20 15:01:33 hermit kernel: init_SP8870:
Jun 20 15:01:33 hermit kernel: i2c-core.o: driver SP8870 DVB demodulator registered.
Jun 20 15:01:33 hermit kernel: i2c-core.o: driver tda8083 DVB demodulator registered.
Jun 20 15:01:33 hermit kernel: i2c-core.o: driver stv0299 DVB demodulator registered.
Jun 20 15:01:33 hermit kernel: i2c-core.o: driver i2c TV tuner driver registered.
Jun 20 15:01:33 hermit kernel: saa7146_init_module
Jun 20 15:01:33 hermit kernel: saa7146_init_one()
Jun 20 15:01:33 hermit kernel: saa7146_core.o: ==> configure_saa7146
Jun 20 15:01:33 hermit kernel: saa7146: rvmalloc called, quant:2
Jun 20 15:01:33 hermit kernel: saa7146: alloc page tables
Jun 20 15:01:33 hermit kernel: saa7146: clear RAM
Jun 20 15:01:33 hermit kernel: saa7146: build page tables
Jun 20 15:01:33 hermit kernel: saa7146: page tables built
Jun 20 15:01:33 hermit kernel: saa7146_core.o: saa7146(1): bus:2, rev:1, mem:0xd089b000.
Jun 20 15:01:33 hermit kernel: saa7146_core.o: master_xfer called, num:1
Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_reset
Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_status_check:0x00000400
Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_status_check:0x00000400
Jun 20 15:01:33 hermit kernel: saa7146: i2c_reset: error_state detected, status:0x00000400
Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_status_check:0x00000100
Jun 20 15:01:33 hermit kernel: saa7146: ==> writeout: 0x100000c0 (before) (to:100)
Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_busy_rise_and_fall
Jun 20 15:01:33 hermit kernel: saa7146: i2c_busy_rise_and_fall; rise wait 5
Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_status_check:0x00000101
Jun 20 15:01:33 hermit kernel: saa7146: i2c_busy_rise_and_fall; fall wait 100
Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_status_check:0x00000101
Jun 20 15:01:33 hermit kernel: saa7146: i2c_busy_rise_and_fall; fall wait 99
Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_status_check:0x00000123
Jun 20 15:01:33 hermit kernel: saa7146: i2c_busy_rise_and_fall: error in address phase
Jun 20 15:01:33 hermit kernel: saa7146: i2c_write_out; error in address phase
Jun 20 15:01:33 hermit kernel: saa7146_core.o: master_xfer: error in address phase
  
I used the lastversion of dvb card driver which got from linuxtv.org.
This card use well in windows 2000.

I must use this card in linux. Who can help me?从网站得到更多信息。MSN Explorer 免费下载:http://explorer.msn.com/lccn


-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.