[linux-dvb] Re: Hauppauge WinTV DVB-c Card cannot use in linux

[Oliver Lorei <oliverlorei@cityweb.de>]

Am Donnerstag, 20. Juni 2002 09:15 schrieb wong hermit:
> Dear All
>       I got a Hauppauge WinTV DVB-c card. The dvb drive in linuxtv.org said
> that it support this type card. But i always got error messages in
> /var/log/messages(which list below) when i load drivers, and dvb.o report
> "init_module : No such device".

Wich Linux and wich Kernel do you use ?

Do you have the PNP support switch off in the Bios from the Mainboard ? ,
unless try with switch it off


Regards 

Oliver Lorei
> Jun 20 15:01:32 hermit kernel: i2c-core.o: i2c core module
> Jun 20 15:01:33 hermit kernel: Linux video capture interface: v1.00
> Jun 20 15:01:33 hermit kernel: i2c-core.o: driver VES1893 DVB demodulator
> registered. Jun 20 15:01:33 hermit kernel: i2c-core.o: driver VES1820 DVB
> demodulator registered. Jun 20 15:01:33 hermit kernel: i2c-core.o: driver
> L64781 DVB demodulator registered. Jun 20 15:01:33 hermit kernel:
> init_SP8870:
> Jun 20 15:01:33 hermit kernel: i2c-core.o: driver SP8870 DVB demodulator
> registered. Jun 20 15:01:33 hermit kernel: i2c-core.o: driver tda8083 DVB
> demodulator registered. Jun 20 15:01:33 hermit kernel: i2c-core.o: driver
> stv0299 DVB demodulator registered. Jun 20 15:01:33 hermit kernel:
> i2c-core.o: driver i2c TV tuner driver registered. Jun 20 15:01:33 hermit
> kernel: saa7146_init_module
> Jun 20 15:01:33 hermit kernel: saa7146_init_one()
> Jun 20 15:01:33 hermit kernel: saa7146_core.o: ==> configure_saa7146
> Jun 20 15:01:33 hermit kernel: saa7146: rvmalloc called, quant:2
> Jun 20 15:01:33 hermit kernel: saa7146: alloc page tables
> Jun 20 15:01:33 hermit kernel: saa7146: clear RAM
> Jun 20 15:01:33 hermit kernel: saa7146: build page tables
> Jun 20 15:01:33 hermit kernel: saa7146: page tables built
> Jun 20 15:01:33 hermit kernel: saa7146_core.o: saa7146(1): bus:2, rev:1,
> mem:0xd089b000. Jun 20 15:01:33 hermit kernel: saa7146_core.o: master_xfer
> called, num:1 Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_reset
> Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_status_check:0x00000400
> Jun 20 15:01:33 hermit kernel: saa7146: ==> i2c_status_check:0x00000400
> Jun 20 15:01:33 hermit kernel: saa7146: i2c_reset: error_state detected,
> status:0x00000400 Jun 20 15:01:33 hermit kernel: saa7146: ==>
> i2c_status_check:0x00000100 Jun 20 15:01:33 hermit kernel: saa7146: ==>
> writeout: 0x100000c0 (before) (to:100) Jun 20 15:01:33 hermit kernel:
> saa7146: ==> i2c_busy_rise_and_fall Jun 20 15:01:33 hermit kernel: saa7146:
> i2c_busy_rise_and_fall; rise wait 5 Jun 20 15:01:33 hermit kernel: saa7146:
> ==> i2c_status_check:0x00000101 Jun 20 15:01:33 hermit kernel: saa7146:
> i2c_busy_rise_and_fall; fall wait 100 Jun 20 15:01:33 hermit kernel:
> saa7146: ==> i2c_status_check:0x00000101 Jun 20 15:01:33 hermit kernel:
> saa7146: i2c_busy_rise_and_fall; fall wait 99 Jun 20 15:01:33 hermit
> kernel: saa7146: ==> i2c_status_check:0x00000123 Jun 20 15:01:33 hermit
> kernel: saa7146: i2c_busy_rise_and_fall: error in address phase Jun 20
> 15:01:33 hermit kernel: saa7146: i2c_write_out; error in address phase Jun
> 20 15:01:33 hermit kernel: saa7146_core.o: master_xfer: error in address
> phase
>
> I used the lastversion of dvb card driver which got from linuxtv.org.
> This card use well in windows 2000.
>
> I must use this card in linux. Who can help me?从网站得到更多信息。MSN
> Explorer 免费下载:http://explorer.msn.com/lccn


--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.