[linux-dvb] Re: SkyStar 2 (cvs dvb-kernel problem)

["Augusto Cardoso" <augusto@carhil.net>]

Hi!

Do you know what version do you have of the Skystar2?

In any case, you need to load the module mt312.o

	Augusto

*********** REPLY SEPARATOR  ***********

On 12/2/2003 at 1:31 AM Denis Fedorishenko wrote:

>Hello linux-dvb,
>
>I am tried to use new demux code, but got problem on SkyStar-2 now.
>Before 1.0.1 working well, but some packetloss and unstable on network
>side.
>
>./getlinks
>make
>./insmod.sh load
>
>Linux video capture interface: v1.00
>saa7146: register extension 'dvb'.
>saa7146: register extension 'budget dvb'.
>saa7146: register extension 'budget_ci dvb'.
>saa7146: register extension 'budget dvb /w video in'.
>usb.c: registered new driver Technotrend/Hauppauge USB-Nova
>PCI: Found IRQ 9 for device 01:0b.0
>PCI: Sharing IRQ 9 with 00:1f.4
>skystar2.c: FlexCopIIB(rev.195) chip found
>DVB: registering new adapter (Technisat SkyStar2 driver).
>master_xfer: write error 0 !
>message 0: flags=0x0, addr=0x68, buf[0]=0x2, len=2
>master_xfer: read error !
>message 2: flags=0x0, addr=0x68, buf=0x83, len=2
>master_xfer: read error !
>message 2: flags=0x0, addr=0x1, buf=0x83, len=65099
>
>root@patohome:~/DVB/dvb-kernel/build-2.4# lsmod
>Module                  Size  Used by    Not tainted
>skystar2               19080   0  (unused)
>dvb-ttusb-budget       21644   0  (unused)
>ttpci-eeprom            1840   0
>saa7146_vv             33572   0
>saa7146                10900   0  [saa7146_vv]
>grundig_29504-491       3712   0
>grundig_29504-401       4264   0
>tda1004x                9124   0
>ves1820                 4832   0
>stv0299                 7816   0  (unused)
>alps_tdmb7              3972   0
>alps_tdlb7              5556   0
>ves1x93                 4996   0
>dvb-core               38892   0  [skystar2 dvb-ttusb-budget
>grundig_29504-491 grundig_29504-401 tda1004x ves1820 stv0299 alps_tdmb7
>alps_tdlb7 ves1x93]
>video-buf              11376   0  [saa7146_vv]
>v4l2-common             2752   0  [saa7146_vv]
>v4l1-compat            11556   0  [saa7146_vv]
>videodev                5664   0  [saa7146_vv]
>input                   3200   0
>iptable_filter          1644   0  (autoclean) (unused)
>ip_tables              12288   1  [iptable_filter]
>uhci                   24496   0  (unused)
>usbcore                58400   1  [dvb-ttusb-budget uhci]
>8139too                15240   1
>mii                     2304   0  [8139too]
>crc32                   2880   0  [8139too]
>pcmcia_core            40032   0
>ide-scsi                9424   0
>agpgart                39576   0  (unused)
>
>If need, i can attach my .config of kernel.
>Kernel - vanilla 2.4.22
>
>01:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 Sky2PC PCI
>[SkyStar2] (rev 02)
>        Subsystem: Techsan Electronics Co Ltd B2C2 Sky2PC PCI [SkyStar2]
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
><TAbort- <MAbort- >SERR- <PERR-
>        Latency: 32
>        Interrupt: pin A routed to IRQ 9
>        Region 0: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
>        Region 1: I/O ports at df80 [size=32]
>
>
>-- 
>Best regards,
> Denis                          mailto:nuclearcat@nuclearcat.com
>
>
>
>-- 
>Info:
>To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.





-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.