[linux-dvb] Re: no frontend with skystar2 2.6b and kernel 2.6-test11

[Steffen Barszus <st_barszus@gmx.de>]

Am Montag, 8. Dezember 2003 00:32 schrieb Augusto Cardoso:
> Hi!
>
> You may want to try the CVS version of the dvb_kernel. The CVS
> version is updated almost daily and it's the latest code. The
> Skystar2 2.6B from the CVS should work, but you need to look at the
> log to find out if the board was detected correctly or not.
>

As I try nearly the same with the same card I drop my mail in here. I 
have started my machine new and load the driver. Never looked at the 
logs before (shame on me, see my other mail)

From dmesg:
saa7146: register extension 'dvb'.
saa7146_core: found saa7146 @ mem e119b000 (revision 1, irq 9) 
(0x13c2,0x0000).
DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3).
DVB: registering frontend 0:0 (VES1893)...
Siemens/Technotrend/Hauppauge PCI rev1.3 adapter 0 has MAC addr = 
00:d0:5c:5b:a5:e1
DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 
8000261b
DVB: AV7111(0) - firmware supports CI link layer interface
av7110(0): adac type set to 0
saa7146_fops: saa7146 (0): registered device video0 [v4l2]
av7110: found av7110-0.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget dvb /w video in'.
usb.c: registered new driver Technotrend/Hauppauge USB-Nova
skystar2.c: FlexCopII(rev.130) chip found
DVB: registering new adapter (Technisat SkyStar2 driver).
probe_tuner: try to attach to Technisat SkyStar2 driver
stv0299.c: setup for tuner Samsung TBMU24112IMB
DVB: registering frontend 1:0 (STV0299/TSA5059/SL1935 based)...
master_xfer: read error !
message 2: flags=0xd11b, addr=0x8960, buf=0x64, len=1024


What my thought was, is that maybe a firmware is needed for the 
SkyStar2, but i haven't really found something about that topic. 

Video is working fine allready. I have attached my only cable to the 
skystar2 and was able to use vdr without a hitch together with my 
fullfeatured card (transfer mode from skystar2 to ff-card). What 
doesn't work is SkyDSL, I guess this is because of the master_xfer 
error ? 

I use kernel 2.4.22 and dvb-kernel.

Steffen



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.