[linux-dvb] need help with linux dvb driver

[ABBAS AL-MUTAWA <abbasalmutawa@yahoo.com>]

Dear Sir

I have DVB card, "TWINHAN VP1020" built on bt878. i've
just correctly installed the latest DVB driver on
kernel-2.6.0-test11.  everythings seems to work very
well, I insmod the driver as wriiten in the DVB-kernel
without any errors.

now, i have just installed DVB player which is the
VDR, but when i try to run "vdr", i get the following
message.

vdr: no primary device found - using first device!


the "lsmod" command gives

[root@localhost dev]# lsmod
Module                  Size  Used by
dvb_bt8xx               8064  0
dst                    14464  0
bt878                  11696  2 dvb_bt8xx,dst
cx24110                 9216  0
dvb_core               60544  3 dvb_bt8xx,dst,cx24110
bttv                  136096  2 dvb_bt8xx,bt878
video_buf              22272  1 bttv
i2c_algo_bit           10504  1 bttv
btcx_risc               4996  1 bttv
i2c_core               25348  3
dvb_bt8xx,bttv,i2c_algo_bit
autofs                 17152  0
parport_pc             36492  2



dmesg gives
*****************
es1371: found chip, vendor id 0x1274 device id 0x5880
revision 0x02
es1371: found es1371 rev 2 at io 0xdf00 irq 3 joystick
0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609
(SigmaTel STAC9721/23)
btaudio: driver version 0.7 loaded [digital+analog]
PCI: Found IRQ 11 for device 0000:02:0d.1
PCI: Sharing IRQ 11 with 0000:02:0d.0
btaudio: Bt878 (rev 17) at 02:0d.1, irq: 11, latency:
32, mmio: 0xf47ff000
btaudio: using card config "default"
btaudio: registered device dsp2 [digital]
btaudio: registered device dsp3 [analog]
btaudio: registered device mixer1
Advanced Linux Sound Architecture Driver Version 0.9.7
(Thu Sep 25 19:16:36 2003 UTC).
request_module: failed /sbin/modprobe -- snd-card-0.
error = -16
unable to register OSS PCM device 0:0
unable to register OSS mixer device 0:0
unable to register OSS mixer device 1:0
ALSA device list:
  #0: Dummy 1
  #1: Virtual MIDI Card 1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind
65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
IrCOMM protocol (Dag Brattli)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 188k freed
hub 1-0:1.0: new USB device on port 1, assigned
address 2
input: USB HID v1.00 Mouse [Cypress Sem Cypress USB
Mouse] on usb-0000:00:1f.2-1
hub 1-0:1.0: new USB device on port 2, assigned
address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional
printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7004
EXT3 FS on hda9, internal journal
Adding 232900k swap on /dev/hda7.  Priority:-1
extents:1
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kudzu: numerical sysctl 1 23 is obsolete.
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
plip: parport0 has no IRQ. Using IRQ-less mode,which
is fairly inefficient!
NET3 PLIP version 2.4-parport gniibe@mri.co.jp
plip0: Parallel port at 0x378, not using IRQ.
lp0: using parport0 (polling).
eth0: Setting full-duplex based on MII #1 link partner
capability of 45e1.
spurious 8259A interrupt: IRQ7.
bttv: driver version 0.9.12 loaded
bttv: using 8 buffers with 2080k (520 pages) each for
capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 11 for device 0000:02:0d.0
PCI: Sharing IRQ 11 with 0000:02:0d.1
bttv0: Bt878 (rev 17) at 0000:02:0d.0, irq: 11,
latency: 32, mmio: 0xf47fe000
bttv0: using: Nebula Electronics DigiTV
[card=104,insmod option]
bttv0: using tuner=-1
bt878: AUDIO driver version 0.0.0 loaded
dvb_bt8xx: unable to determine DMA core of card 0
attach: checking "bt878 #0 [hw]"
find by pci: checking "bt878 #0 [hw]"
Parameter dst_type needs an argument
dst: `' invalid for parameter `dst_type'
dst: Unknown parameter `dst_type_0'
Parameter dst_type needs an argument
dst: `' invalid for parameter `dst_type'
No module found in object
[root@localhost video]#
*****************************************





 
please, if you can help do not hesitat to contact by
as soon as possible





Thanks & 
best regrads

abbas almutawa
abbaslamutawa@yahoo.com

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.