[linux-dvb] Pinnacle pctv

[Bálint László <balint_laszlo@tiszanet.hu>]

Hello!

I`m a user from Hungary.
My problem:

scanning /usr/share/linuxtv-dvb-apps/scan/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
> > > tune to: 12551:v:0:22000
WARNING: >>> tuning failed!!!
> > > tune to: 12551:v:0:22000 (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.


root:/home/laci# szap -r "MBC"
reading channels from file '/root/.szap/channels.conf'
zapping to 206 'MBC':
sat 1, frequency = 12595 MHz V, symbolrate 27500000, vpid = 0x00a0, apid
= 0x0050
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal 9393 | snr 0000 | ber 00000a1e | unc 00c0f601 |
status 1f | signal 9696 | snr 52ac | ber 00001db3 | unc 00c00000 |
FE_HAS_LOCK
status 1f | signal 9696 | snr 136a | ber 00001f2c | unc 00c00000 |
FE_HAS_LOCK
status 1f | signal 9696 | snr 13f0 | ber 00002041 | unc 00c00000 |
FE_HAS_LOCK
status 1f | signal 9696 | snr 13c9 | ber 00001e8b | unc 00c00000 |
FE_HAS_LOCK
status 1f | signal 9696 | snr 145d | ber 00001f6a | unc 00c00000 |
FE_HAS_LOCK
status 1f | signal 9696 | snr 13b4 | ber 00001e4e | unc 00c00000 |
FE_HAS_LOCK
status 1f | signal 9696 | snr 1376 | ber 00001f97 | unc 00c00000 |
FE_HAS_LOCK
status 1f | signal 9696 | snr 1409 | ber 00001f77 | unc 00c00000 |
FE_HAS_LOCK
=============================================
The output similar when i`m probing RAI 1, TV 5, TV7, Video  Italia,
Digitaly, ...
=============================================
root:/home/laci# szap -r "RTL2"
reading channels from file '/root/.szap/channels.conf'
zapping to 27 'RTL2':
sat 0, frequency = 12188 MHz H, symbolrate 27500000, vpid = 0x00a6, apid
= 0x0080
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal 8d8d | snr 0000 | ber 0000ffff | unc 00b9e8cd |
status 00 | signal 8f8f | snr 4e22 | ber 0000ffff | unc 00b90000 |
status 00 | signal 8f8f | snr 4af3 | ber 0000ffff | unc 00b90000 |
status 00 | signal 8f8f | snr 4ad8 | ber 0000ffff | unc 00b90000 |
=============================================
The output similar when i`m probing ARTE, Super RTL, RTL Television, etc
=============================================

root:/home# mplayer - < /dev/dvb/adapter0/dvr0
MPlayer 1.0pre3try2-3.3.2 (C) 2000-2003 MPlayer Team

CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred 2139 MHz (Family:
6, Stepping: 1)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
....
....
- lejátszása
Olvasás a szabványos bemenetről (stdin)...
(Reading from stdin)
=================================
And waiting, waiting and waiting....
=================================
The dmesg output:root:/home# dmesg|grep bttv
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 01:08.0, irq: 17, latency: 32, mmio: 0xde000000
bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c
bttv0: using: Pinnacle PCTV Sat [card=94,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ff00fc [init]
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: IRQ lockup, cleared int mask [bits: GPINT*]
root:/home# dmesg|grep DVB
DVB: registering new adapter (Pin).
DVB: registering frontend 0:0 (Conexant CX24110 with CX24108 tuner, aka
HM1221/HM1811)...

Any idea?

Laci



--
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.