[linux-dvb] dvb-bt8xx and dst char major problem ? can't find frontend

[Pierre <nunux-dev@wanadoo.fr>]

Hi

I'm not sure i'm doing it right. I'm using a  2.6.8-1 kernel and 
linuxtv-dvb-1.1.1 with PCTV SAT CI card.

Here is what i'm loading :
modprobe videodev
modprobe bttv card=113 i2c_hw=1
modprobe dvb-core dvbdev_debug=1 dvb_frontend_debug=1
modprobe v4l1-compat debug=1
modprobe dst dst_verbose=1 dst_debug=1
modprobe dvb-bt8xx debug=1

dmesg is :

Linux video capture interface: v1.00
i2c_core: Unknown parameter `i2c_debug'
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 18 (level, high) -> IRQ 18
bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 18, latency: 32, mmio: 
0xe0000000
bttv0: detected: Pinnacle PCTV SAT CI [card=113], PCI subsystem ID is 
11bd:0026
bttv0: using: Twinhan DST + clones [card=113,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00f584fd [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:01:06.1[A] -> GSI 18 (level, high) -> IRQ 18
bt878(0): Bt878 (rev 17) at 01:06.1, irq: 18, latency: 32, memory: 
0xe0001000
dst: Unknown parameter `dst_check_ci'
dvb_bt8xx: enumerating available bttv cards...
dvb_bt8xx: identified card0 as DST DVB-S
attach: checking "bt878 #0 [hw]"
find by pci: checking "bt878 #0 [hw]"
attach: "bt878 #0 [hw]", to card 0
DVB: registering new adapter (DST).
dst_attach: check ci
bt878 find by dvb adap: checking "DST"
write_dst writing 0x00 0x06 0x00 0x00 0x00 0x00 0x00 0xfa
write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
write_dst: write_dst error (err == -5, len == 0x08, b0 == 0x00)
dst_check_ci: write not successful, maybe no card?
DVB: register adapter0/demux0 @ minor: 4 (0x04)
DVB: register adapter0/dvr0 @ minor: 5 (0x05)
DVB: register adapter0/net0 @ minor: 7 (0x07)

The ci is not very important. But when i try to launch the scan dvb apps 
it says :

scanning /usr/local/addons/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 19 No 
such device

The dst module is the frontend isn't it ? It's loaded :
lsmod :
Module                  Size  Used by
dvb_bt8xx               6404  0
dst                    14092  0
bt878                   9536  2 dvb_bt8xx,dst
v4l1_compat            14084  0
dvb_core               59156  2 dvb_bt8xx,dst
tuner                  19280  0
bttv                  149100  3 dvb_bt8xx,bt878
video_buf              18372  1 bttv
i2c_algo_bit            9352  1 bttv
v4l2_common             5376  1 bttv
btcx_risc               4296  1 bttv
i2c_core               20160  4 dvb_bt8xx,tuner,bttv,i2c_algo_bit
videodev                8000  1 bttv

Is this a char major pb or am I simply doing it badly ?

Thanks for help. Best regards

Pierre



--

-------------------------------------------------
Guess What, THE ..
-------------------------------------------------

REAL PORTION of Microsoft Windows code:

while (memory_available) {
eat_major_portion_of_memory (no_real_reason);
if (feel_like_it)
make_user_THINK (this_is_an_OS);
gates_bank_balance++;
;
while (memory_microsofted) {
system_response;
cout blow_this_OS_away;
cout install linux++;

-------------------------------------------------