[linux-dvb] cinergyT2: which kernel/usb module to use?

[Stefan Lucke <stefan@lucke.in-berlin.de>]

I'm trying to my cinergyT2 to work with kernel 2.6.7 on an epia board.
Using ehci I got only error messages, so I tried uhci.

When loding uhci the blue led of the device went off.

messages from loading uhci:
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.0: port 1 portsc 0099
Nov 25 21:40:52 bodega2 hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101
Nov 25 21:40:52 bodega2 usb 1-1: new full speed USB device using address 2
Nov 25 21:40:52 bodega2 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
Nov 25 21:40:52 bodega2 usb 1-1: default language 0x0409
Nov 25 21:40:52 bodega2 usb 1-1: Product: Cinergy Tē
Nov 25 21:40:52 bodega2 usb 1-1: Manufacturer: TerraTec GmbH
Nov 25 21:40:52 bodega2 usb 1-1: hotplug
Nov 25 21:40:52 bodega2 usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Nov 25 21:40:52 bodega2 usb 1-1:1.0: hotplug
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.0: port 2 portsc 008a
Nov 25 21:40:52 bodega2 hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.0: port 2 portsc 0088
Nov 25 21:40:52 bodega2 hub 1-0:1.0: port 2 enable change, status 00000100
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.2: port 1 portsc 048a
Nov 25 21:40:52 bodega2 hub 3-0:1.0: port 1, status 0108, change 0003, 12 Mb/s
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.2: port 2 portsc 058a
Nov 25 21:40:52 bodega2 hub 3-0:1.0: port 2, status 0308, change 0003, 1.5 Mb/s
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.1: port 1 portsc 008a
Nov 25 21:40:52 bodega2 hub 2-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.1: port 2 portsc 018a
Nov 25 21:40:52 bodega2 hub 2-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.1: port 1 portsc 0088
Nov 25 21:40:52 bodega2 hub 2-0:1.0: port 1 enable change, status 00000100
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.1: port 2 portsc 0188
Nov 25 21:40:52 bodega2 hub 2-0:1.0: port 2 enable change, status 00000300
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.2: port 1 portsc 0488
Nov 25 21:40:52 bodega2 hub 3-0:1.0: port 1 enable change, status 00000108
Nov 25 21:40:52 bodega2 uhci_hcd 0000:00:10.2: port 2 portsc 0588
Nov 25 21:40:52 bodega2 hub 3-0:1.0: port 2 enable change, status 00000308
Nov 25 21:40:53 bodega2 uhci_hcd 0000:00:10.1: suspend_hc
Nov 25 21:40:54 bodega2 uhci_hcd 0000:00:10.2: suspend_hc

messages from dvbscan:
bodega2 scan # ./dvbscan dvb-t/de-Berlin
scanning dvb-t/de-Berlin
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 522000000 0 2 9 1 1 2 0
initial transponder 570000000 0 2 9 1 1 2 0
initial transponder 658000000 0 2 9 1 1 2 0
>>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
ERROR: interrupted by SIGINT, dumping partial result...
dumping lists (0 services)
Done.

from syslog:
Nov 25 21:53:07 bodega2 drivers/usb/core/urb.c: usb_submit_urb: bogus endpoint 2-IN on usb-0000:00:10.0-1 (bad maxpacket 0)
Nov 25 21:53:23 bodega2 drivers/usb/core/urb.c: usb_submit_urb: bogus endpoint 2-IN on usb-0000:00:10.0-1 (bad maxpacket 0)


-- 
stefan lucke