[linux-dvb] Re: 2.6.10-rc3-bk3 doesn't properly detect skystar2'sfrontend

[Niklas Peinecke <n.peinecke@web.de>]

Prakash K. Cheemplavam wrote:
> Hi,
>
> dmesg shows:
>
>
> drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev.130) chip found
> drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters
> DVB: registering new adapter (SkyStar2).
> master_xfer: write error 0 !
> message 0: flags=0x0, addr=0x68, buf[0]=0x2, len=2
> master_xfer: read error !
> message 0: flags=0x0, addr=0x68, buf=0x0, len=1
> message 1: flags=0x1, addr=0x68, buf=0x0, len=1
> master_xfer: read error !
> message 0: flags=0x0, addr=0xf, buf=0x7f, len=1
> message 1: flags=0x1, addr=0xf, buf=0x0, len=1
> mt352_read_register: readreg error (ret == -121)
> skystar2: A frontend driver was not found for device 13d0/2103 subsystem 
> 13d0/2103
Maybe you need the stv0299 frontend?

> I have compiled in dvbcore, skystar2 and mt312 and this worked with 
> 2.6.10-rc3 kernel.
What does that mean? It used to work before or just compilation worked?

Niklas