On Sat, 11 Dec 2004, Timo Nentwig wrote:
Try to set it to INVERSION_ON. This was also my problem when I tried to get my dibusb device running. Others reported that it is wrong to use Inversion_on, but if it will work for you I wouldn't be so sure about that. I suppose other demods (which have been probably used to create this config) don't care about the inversion, because they always do an automatic search.Patrick Boettcher wrote:On Sat, 11 Dec 2004 tmp@nitwit.de wrote: Hi,To me this looks alright but it's probably not because: # ./tzap -c channels.conf-dvbt-berlin N24 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 658000000 Hz video pid 0x00e1, audio pid 0x00e2 status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ffff | snr 0000 | ber 00000000 | unc 00000000 |Could please post the line of "N24" from your channels.conf?N24:658000000:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:225:226:16398