[linux-dvb] TT USB DEC 3000-s

[Alexandre Cardoso <alexandre.cardoso@novabase.pt>]

Hi all,
I am trying to put the USB DEC 3000-s working with my laptop but i had 
no luck yet. Maybe some one can help me.

I saw in the mailing list that someone has this working:
http://www.linuxtv.org/mailinglists/linux-dvb/2004/05-2004/msg00028.html

My distro is Fedora 2 with kernel 2.6.8-1.521 running in a Toshiba 
Satellite, Pentium 4.

Below is the output that i get.

Tks,
Alex

/* szap output to any service (even with satellite cable unplugged) */
./szap -c channels.conf-dvbs-astra -n 1
reading channels from file 'channels.conf-dvbs-astra'
zapping to 1 'Das Erste':
sat 0, frequency = 11837 MHz H, symbolrate 27500000, vpid = 0x0065, apid 
= 0x0066
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal fffe | snr fffe | ber fffffffe | unc fffffffe | 
FE_HAS_LOCK
status 1f | signal fffe | snr fffe | ber fffffffe | unc fffffffe | 
FE_HAS_LOCK
...

/* scan output */
./scan dvb-s/Astra-19.2E
scanning dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 10773000 H 22000000 5
>>> tune to: 10773:h:0:22000
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.

/* dmesg output */
usb 1-1: new full speed USB device using address 4
ttusb_dec: Firmware 1.15<6>ttusb_dec: found DSP code "DEC2540-t".
usbcore: registered new driver ttusb-dec
usb 1-1: USB disconnect, address 4
usb 1-1: new full speed USB device using address 5
DVB: registering new adapter (DEC3000-s).
DVB: registering frontend 0:0 (TechnoTrend/Hauppauge DEC3000-s Frontend)...
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget dvb /w video in'.
usbcore: registered new driver Technotrend/Hauppauge USB-Nova