[linux-dvb] Re: Twinhan Visionplus VisionDVT mini ter

[Manu Abraham <manu@kromtek.com>]

On Wed December 22 2004 4:41 pm, Lars Lindström wrote:
> It seems we have sort of the same problem here. I compiled me a
> 2.6.10-rc3 kernel with the modules you loaded yourself. I managed to get
> a /dev/dvb/adapter0 directory and there I found
>
> demux0  dvr0  frontend0  net0
>
> How do I go about testing this? Shouldn't I get a video0 device also?
You don't get a video device on a budget card..

Manu
>
> Regards
> Lars
>
> Benedict White wrote:
> >I have one of these cards and am having some difficulty getting it to
> > work.
> >
> >I emailed twinhan, and apparrently it has a philips tu-1216 tuner.
> >
> >Now, it is a pci dvb card (free view in the UK).
> >
> >I am running kernel 2.6.10-rc3 (Because I figured it had all the patches
> > in I need).
> >
> >I built dvb-core into the kernel.
> >When I modprobe bttv I get:
> >Dec 22 01:56:05 pvr bttv: driver version 0.9.15 loaded
> >Dec 22 01:56:05 pvr bttv: using 8 buffers with 2080k (520 pages) each for
> > capture Dec 22 01:56:05 pvr bttv: Bt8xx card found (0).
> >Dec 22 01:56:05 pvr ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level,
> > low) -> IRQ 5
> >Dec 22 01:56:05 pvr bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 5,
> > latency: 32, mmio: 0xdf002000
> >Dec 22 01:56:05 pvr bttv0: detected: Twinhan VisionPlus DVB-T [card=113],
> > PCI subsystem ID is 1822:0001
> >Dec 22 01:56:05 pvr bttv0: using: Twinhan DST + clones
> > [card=113,autodetected] Dec 22 01:56:05 pvr bttv0: gpio: en=00000000,
> > out=00000000 in=00ffffff [init] Dec 22 01:56:05 pvr bttv0: using tuner=4
> >Dec 22 01:56:05 pvr bttv0: add subdevice "dvb0"
> >Dec 22 01:56:35 pvr bt878: AUDIO driver version 0.0.0 loaded
> >Dec 22 01:56:35 pvr bt878: Bt878 AUDIO function found (0).
> >Dec 22 01:56:35 pvr ACPI: PCI interrupt 0000:00:0a.1[A] -> GSI 5 (level,
> > low) -> IRQ 5
> >Dec 22 01:56:35 pvr bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 5, latency:
> > 32, memory: 0xdf000000
> >Dec 22 01:56:35 pvr DVB: registering new adapter (bttv0).
> >
> >Then if I modprobe dst I get:
> >Dec 22 01:57:18 pvr bt878 find by dvb adap: checking "SMBus Via Pro
> > adapter at 5000"
> >Dec 22 01:57:18 pvr bt878 find by dvb adap: NOT found "SMBus Via Pro
> > adapter at 5000"
> >Dec 22 01:57:18 pvr bt878 find by dvb adap: checking "bt878 #0 [hw]"
> >
> >And nothing more.
> >
> >Out of interest I went on to try all the front ends and when I tried
> > cx22702 I got: Dec 22 02:05:04 pvr cx22702: Detected Hauppauge Nova-T
> > DVB-T - PLL Thomson DTT759x
> >Dec 22 02:05:06 pvr cx22702_validate_eeprom eeprom content is not valid
> >
> >just in case that helps anyone.
> >
> >So the question is where to go from here.
> >
> >i2c seems loaded with bits to recognise the bttv bits.
> >
> >What am I doing wrong?
> >
> >Should I be loading the bttv driver at all?
> >
> >Kind regards
> >
> >Benedict White