[vdr] Re: Video Disk Recorder version 0.97

["Koch, Steffen" <steffen.koch@sphinx-elektronik.de>]

it's not that important but nice to have. And a OSD "disappearing" is just
annoying... ;-))

> -----Original Message-----
> From: Klaus Schmidinger [mailto:Klaus.Schmidinger@cadsoft.de]
> Sent: Tuesday, October 23, 2001 6:12 PM
> To: vdr@linuxtv.org
> Subject: [vdr] Re: Video Disk Recorder version 0.97
> 
> 
> "Koch, Steffen" wrote:
> > 
> > is there a known workaround or planned fix??
> 
> The workaround is to disable the ShowReplayMode function.
> 
> This bug was reported only today on this list.
> You make it sound like this is the most important function
> of all...!?
> 
> Klaus
> 
> > 
> > > -----Original Message-----
> > > From: Sergei Haller [mailto:Sergei.Haller@math.uni-giessen.de]
> > > Sent: Tuesday, October 23, 2001 11:25 AM
> > > To: 'vdr@linuxtv.org'
> > > Subject: [vdr] Re: Video Disk Recorder version 0.97
> > >
> > >
> > > On Tue, 23 Oct 2001, Koch, Steffen wrote:
> > >
> > > > Is there a known problem with the OSD "disappearing" after
> > > watching a
> > > > recording. Disappearing in this case means the the OSD is 1
> > > char in height
> > > > and approx. 6-8 chars wide. This is observed on my machine
> > > with driver
> > > > 010921 and newer with VDR0.96 and VDR0.97. I haven't tested
> > > with older
> > > > drivers. With VDR0.95 everything is fine that way. Not
> > > tested with newer
> > > > driver upto now. I'll test that in lunch-break.
> > >
> > >
> > > I have seen this several times with 0.96. The workaround is
> > > to disable the
> > > feature "display the current action while replay" (or 
> however it is
> > > called) in the setup menu.
> > >
> > > there must be something wrong with it. e.g. if you are
> > > replaying without
> > > the time bar, set some marks and jump to one of them
> > > (bringing the time
> > > bar on screen) then press 2 to start the cutting process, 
> the time bar
> > > disappears, still showing the small pause status "  ||  " 
> and puts the
> > > message "Schnittvorgang gestartet" into _this_ small OSD.
> > > (you just see
> > > the "Schni" or something likethat).
> > >    After that sometimes you get the "normal" OSD (with the OK
> > > or menu or
> > > whatever button),
> > >    but sometimes the OSD stays in the 1x6 (or 1x8) size
> > > until you restart vdr.