[vdr] No timed recordings with vdr0.97 and dvb20010922

[christophackermann@t-online.de (Christoph Ackermann)]

Hello list.

I switched from vdr0.96 to vdr0.97; driver was 20010922 with stillframe
patch and with vdr0.96 all happens very well.
But with vdr0.97 you can't record via timer; instant recording runs ok. 
Vdr tries to write data but theres no data from the driver - see logs
below. Sorry for only loglevel "2".
After about three minutes vdr initiates an 'emergency exit' and executes
a driver restart and so on.

With driver 20010921 all works fine.

[snip]
 kernel: dvb: 2 dvb(s) found!
 su: (to root) root on /dev/tty1
 PAM-unix2[13639]: session started for user root, service su
 vdr[13640]: VDR version 0.97 started
 vdr[13640]: loading /video0/setup.conf
 vdr[13640]: loading /video0/channels.conf
 vdr[13640]: loading /video0/timers.conf
 vdr[13640]: loading /video0/commands.conf
 vdr[13640]: loading /video0/keys-pc.conf
 vdr[13640]: found 2 video devices
 vdr[13640]: setting primary DVB to 1
 vdr[13640]: switching to channel 1
 vdr[13640]: SVDRP listening on port 2001
 vdr[13640]: timer 1 start
 vdr[13640]: switching to channel 4
 vdr[13640]: record /video0/arte-Archimedes/_/2001-10-30.19:00.90.90.rec
 vdr[13648]: ERROR: no useful data seen within 10486452 byte of video
stream
 vdr[13648]: initiating emergency exit
 vdr[13640]: emergency exit requested - shutting down
 vdr[13640]: saved setup to /video0/setup.conf
 vdr[13640]: exiting
 vdr[13640]: emergency exit!
[snip]


Regards,
 Christoph

-- 
"... and all the hippies work for IBM or take control ..."
Joe Jackson - Big World, 1987