[vdr] Re: AW: Compiling problem

[Uwe Ortner <uwe.ortner@classic-net.de>]

I also tried "kvdr" and the message was

"kvdr and v4l-conf disagree about the framebuffer geometry"

What does this mean?

Regards 
Uwe


Am Son, 2002-01-13 um 12.58 schrieb Uwe Ortner:
> Hello Jochen,
> 
> thanks for the link. Now I can compile vdr without errors :-))
> 
> As soon as I start vdr (./vdr -v /video) I get
> this message:
> ##############
> vdr[1815]: loading /video/channels.conf
> vdr[1815]: loading /video/keys-pc.conf
> vdr[1815]: can't open '/video/keys-pc.conf'
> vdr[1815]: probing /dev/ost/frontend0
> vdr[1817]: EIT processing thread started (pid=1817) - master
> vdr[1815]: probing /dev/ost/frontend1
> vdr[1815]: found 1 video device
> vdr[1815]: setting primary DVB to 1
> vdr[1815]: SVDRP listening on port 2001
> vdr[1815]: learning keys
> 
> Seems to be ok - but my TV-Screen turns black
> 
> I've copied the channels.conf.cable to /video/channels.conf 
> (but not the keys-pc.conf - due to learn my own settings)
> 
> My TV is connected via the SCART cable
> 
> Is there a flag for using SCART instead of YC?
> 
> Regards 
> Uwe
> 
> 
> Am Son, 2002-01-13 um 12.23 schrieb Jochen Vieten:
> > Hi,
> > 
> > your dvb driver is too old.
> > 
> > I'm using this one:
> > 
> > ftp://ftp.cadsoft.de/pub/people/kls/vdr/siemens_dvb-0.9-20011117.tgz
> > 
> > Daily driver snapshots:
> > 
> > http://www.linuxdvb.tv/download.html
> > 
> > Have fun,
> > 
> > Jochen
> > 
> > -----Ursprüngliche Nachricht-----
> > Von: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org]Im Auftrag
> > von Uwe Ortner
> > Gesendet: Sonntag, 13. Januar 2002 11:58
> > An: VDR
> > Betreff: [vdr] Compiling problem
> > 
> > 
> > Hello,
> > 
> > compiling VDR results in a message:
> > ###################################
> > g++ -g -O2 -Wall -Woverloaded-virtual -m486 -c -DREMOTE_KBD
> > -D_GNU_SOURCE -I../DVB/ost/include config.c
> > In file included from config.h:17,
> >                  from config.c:10:
> > dvbapi.h:107: syntax error before `;'
> > make: *** [config.o] Error 1
> > 
> > I use this packages (SuSE 7.3,2.4.10-4GB):
> > ##########################################
> > libdvdcss-1.0.0.tar.gz
> > libdvdread-0.9.2.tar.gz
> > siemens_dvb-0.9.3.tar.gz
> > vdr-0.99pre1-mp3-0.31.tar.gz
> > 
> > My installation steps:
> > ######################
> > cp /boot/vmlinuz.config /usr/src/linux/.config
> > cp /boot/vmlinuz.autoconf.h /usr/src/linux/include/linux/autoconf.h
> > cp /boot/vmlinuz.version.h /usr/src/linux/include/linux/version.h
> > make oldconfig
> > make menuconfig (serial as modul; reiser build in kernel)
> > make dep clean bzImage modules modules_install bzlilo
> > init 6
> > 
> > extracting siemens_dvb-0.9.3.tar.gz       to /opt
> > extracting vdr-0.99pre1-mp3-0.31.tar.gz   to /opt
> > 
> > Because I know DVD support can cause some trouble I did not install
> > libdvd***
> > 
> > cd /opt/DVD/driver
> > make
> > make insmod
> > 
> > Output from /var/log/messages:
> > ##############################
> > i2c-core.o: i2c core module
> > i2c-core.o: driver VES1893 DVB demodulator registered.
> > i2c-core.o: driver VES1820 DVB demodulator registered.
> > i2c-core.o: driver L64781 DVB demodulator registered.
> > L64781: init done
> > i2c-core.o: driver tda8083 DVB demodulator registered.
> > i2c-core.o: driver stv0299 DVB demodulator registered.
> > i2c-core.o: driver i2c TV tuner driver registered.
> > saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xd0911e00.
> > VES1820: attaching VES1820 at 0x12
> > i2c-core.o: client [VES1820] registered to adapter [saa7146(1)](pos. 0).
> > VES1820: attached to adapter saa7146(1)
> > tuner: chip found @ 0x61
> > i2c-core.o: client [i2c tv tuner chip] registered to adapter
> > [saa7146(1)](pos. 1).
> > i2c-core.o: adapter saa7146(1) registered as adapter 0.
> > dvb0: AV7111 - firm f0240009, rtsl b0250018, vid 71010068, app 00010002
> > dvb0: DVB-C analog module detected, initializing MSP3400
> > dvb: 1 dvb(s) found
> > 
> > Until this point everything is fine and I can see a TV-channel with my
> > Siemens DVB-C card (analog modul / with CI Interface - Irdeto is not
> > plugged)
> > 
> > I also tried different mixes from vdr/dvb packages (as seen on Klaus
> > Homepage / linuxtv.org) but its the same result
> > 
> > Any ideas?
> > 
> > Help is highly appreciated
> > 
> > Regards Uwe
> > 
> > BTW: How to I apply the "diff" file from Klaus Homepage?
> >      I tried "patch -p0 < filename" in the DVB/driver directory but I
> > got an error message
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> 
> 
> 
> 
> 
-- 
Mit freundlichen Grüßen / Best regards

U. Ortner

ClassicNet GmbH
Leonrodstr. 34
80636 München

Tel.: +49 89 121551-551
Fax.: +49 89 121551-599
http://www.classic-net.de