[vdr] Re: VDR, LIRC and the Hauppauge DVB-s 2.1 remote control

["Ronald Haut" <ronald.haut@web.de>]

On Tue, 15 Jan 2002 15:11:52 +0100, Markus Dahlweid wrote:

>Hi,
>
>I recently found out, that the DVB-driver is supported by the latest
>CVS version of lirc. I compiled the lirc modules of the DVB driver and
>configured lirc to access the IR-receiver of my Hauppauge DVBs
>Revision 2.1.
>
>When I am using irrecord to get the remote control commands from the
>Hauppauge remote control the detection of the toggle bit fails. Right
>now my lirc-configuration looks as follows:
>
>--- lircd.conf ---
>begin remote
>
>   name  HauppaugeVDR
>   bits           8
>   eps            30
>   aeps          100
>
>   one             0     0
>   zero            0     0
>   pre_data_bits   24
>   pre_data       0x0
>   gap          199970
>   min_repeat      14
>   toggle_bit      0
>
>
>       begin codes
>           Up                       0x0000000000000020
>           Down                     0x0000000000000021
>           Menu                     0x000000000000000F
>           Ok                       0x000000000000002E
>           Back                     0x000000000000000C
>           Left                     0x0000000000000011
>           Right                    0x0000000000000010
>           Red                      0x000000000000000D
>           Green                    0x0000000000000022
>           Yellow                   0x000000000000001E
>           Blue                     0x0000000000000026
>           0                        0x0000000000000000
>           1                        0x0000000000000001
>           2                        0x0000000000000002
>           3                        0x0000000000000003
>           4                        0x0000000000000004
>           5                        0x0000000000000005
>           6                        0x0000000000000006
>           7                        0x0000000000000007
>           8                        0x0000000000000008
>           9                        0x0000000000000009
>       end codes
>
>end remote
>--- end of file ---
>
>This seems basically to be the correct configuration, since I can use
>the remote control to send VDR some commands. But using the Up and
>Down buttons in any VDR On Screen Menu, which displays a list of
>items, has some stange effect: the marked line moves up/down to the
>end/beginning of the displayed list. Right now there seems to be no
>way to access any other items shown in the list.
>
>Has anyone managed to configure LIRC for the the Hauppauge remote
>control so that everything works as expected?
>
>Bye,
>Markus
>
>
>
>


Hi Markus,

try this original file, at least it is working for me. You need to change the buttons, of course.

#
# this config file was automatically generated
# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
#
# contributed by Jens Leuschner <leuschner@gmx.net>
#
# brand:             Hauppauge
# model:             
# supported devices: WinTV primo; WinTV pci; WinTV radio
#
# This config file will work with both homebrew receivers and 
# original Hauppauge TV cards !!!
#

begin remote

  name  rem1
  bits           32
  flags SHIFT_ENC
  eps            30
  aeps          100

  one           950   830
  zero          950   830
  plead         960
  gap          89584
  repeat_bit      2

      begin codes
          TV                       0x000000008000000F
          RADIO                    0x000000008000000C
          FULL_SCREEN              0x000000008000002E
          CH+                      0x0000000080000020
          CH-                      0x0000000080000021
          VOL-                     0x0000000080000011
          VOL+                     0x0000000080000010
          MUTE                     0x000000008000000D
          SOURCE                   0x0000000080000022
          1                        0x0000000080000001
          2                        0x0000000080000002
          3                        0x0000000080000003
          4                        0x0000000080000004
          5                        0x0000000080000005
          6                        0x0000000080000006
          7                        0x0000000080000007
          8                        0x0000000080000008
          9                        0x0000000080000009
          0                        0x0000000080000000
          RESERVED                 0x000000008000001E
          MINIMIZE                 0x0000000080000026
      end codes

end remote