[vdr] Re: thanks for channelsradio.conf, but...

["Uwe Scheffler" <linux_dvb@uni.de>]

Klaus Schmidinger wrote:
> Dave Chapman wrote:
> >
> > On Sunday 03 February 2002 11:15, Klaus Schmidinger wrote:
> > > Well, I guess with VPID = 1 you are actually recording video data,
> > > which I guess is not what you really want - or am I wrong here?
> >
> > As you know, the PID is a 13 bit value in the TS headers - i.e. in the
range
> > 0...8191.  PIDs 0, 1 and 2 and 16-20 (and possibly other values) are
reserved
> > for the service information and will never contain video or audio (but
will
> > contain data).
> >
> > I would suggest that whatever special PID you reserve for "no video",
you
> > check for it when you are setting the filters and don't set a video
filter on
> > that PID.  A PID of 0 would seem to be the easiest and also the most
logical.
> >
> > Another thing to remember - the driver uses the dummy PID value of
"8192" to
> > get the entire TS from a budget card so you don't want to set that PID
in
> > normal use.
> >
> > Regards,
> >
> > Dave.
>
> Using '0' would appear to be the most logical choice (having the real
meaning
> of "no video").
>
> @Uwe Scheffler: can you confirm that your radio channels still work if you
use
> '0' instead of '1' or '8191'? Of course you will have to adapt the patch
> accordingly, but I guess you already did that when using '1'...
>

if i use VPID=0 (or VPID=8191) then isn't the radio channel decoded?
(I hear nothing!) can this confirm anybody?
(Free Radiochannels you exclude of this problem!)


Mfg Uwe


> Klaus
> --
> _______________________________________________________________
>
> Klaus Schmidinger                       Phone: +49-8635-6989-10
> CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
> Hofmark 2                               Email:   kls@cadsoft.de
> D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
> _______________________________________________________________
>
>