[vdr] AW: Re: DVB-S-Card on fire...

[nisele@t-online.de (Nikolaus Isele)]

Hi,

try Spoerle Electronic...

cu Niko

> -----Ursprüngliche Nachricht-----
> Von: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org]Im Auftrag
> von Jean-Claude REPETTO
> Gesendet: Montag, 11. Februar 2002 22:54
> An: vdr@linuxtv.org
> Betreff: [vdr] Re: DVB-S-Card on fire...
>
>
>
> ----- Original Message -----
> From: Andreas <a.feller@gmx.net>
> To: <vdr@linuxtv.org>
> Sent: Monday, February 11, 2002 6:38 PM
> Subject: [vdr] DVB-S-Card on fire...
>
>
> > Hello list,
> >
> > I'm having quite some hardware problem:
> > On Saturday, my PC started to smell, the fuse was blown,
> and my PC won't
> > start with the DVB-card in slot any more.
> > The other parts are OK.(At least I hope you can read this...)
> >
> > The LNBP-16SP... (and something else, the rest of the
> number is burned
> > ;-( ), a 10-pin SMD-device,
> > which is located at the 'left bottom' of the card, now has
> an ugly hole.
> >
> > Unfortunately, the warranty for the card has already expired.
> >
> > In the docs I found, the device does something like
> loop-through (although
> I
> > have a 2.1 card with no loop-through-out)
> >
> > Any idea what this chip does and if it is available somewhere ?
> >
> > Trying to solder would be a last hope. (Maybe it's the only
> part that
> > died...)
>
> Hi,
>
> This chip is a voltage regulator that supplies power to the
> LNB. May be
> there is a short-circuit in your LNB or in the coax cable.
> I have a similar problem, I have a card which has a dead
> LNBP-xx, and I
> couldn't find a replacement part.
> The chip is manufactured by ST Microlectronics, you can
> download the data
> sheet and an application note on their website.
> If you find a source, please inform me.
>
> Jean-Claude
>
>
>
>