Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[vdr] Hauppauge NEXUS-s






Obvious differences between DVB-s cards
Hauppauge WinTV-DVB-S vs.  Hauppauge WinTV-NEXUS-S:
"old" vs "new"

Sticker on Tuner:
WinTV-NEXUS Version 2.10  vs. Version 2.1
                       ^                 ^

Big sticker on solder side
DVBS 564 ......  vs. DVB-S 075 ......
                        ^
                        
Small sticker on solder side:
The Nexus-s 2.1 has now MAC Address "MAC 00D05C.....E"

Both uses the same 2.1 Layout TT2000.45 on component side
but the solder side now contains the numbers: 0211 and MEC-2 94V-0, 
but looks identical. so onl another board vendor may have been involved.

Weight: 172 gramm vs 163 gramm



Above the tuner near the slot the big coil GS151 is missing now.
The LM358 and it's passive components are missing too.

Over the the sound chip (can't see if the IC TI 320AD80C is real there below) 
is a piggypack with CS4341-KS and 2 wires to the tuner pin 7,8
CS4340/CS4341 is a Digital to Analog converter (IIRC the one of the Rev. 1.6)

TMS320-AV711GFN is still a TMX320AV71111GFN AD 1CZBDZ3
SAA7146AH CB1868 Tt00209 4

Tuner is still a BSRU6-502A


HTH




Home | Main Index | Thread Index