Mailing List archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[vdr] Re: Hint for setting J2 output to y/c or rgb

To: vdr@linuxtv.org
Subject: [vdr] Re: Hint for setting J2 output to y/c or rgb
From: GW <gewagner@gmx.at>
Date: Wed, 03 Jul 2002 11:21:16 +0200
Content-type: text/plain; charset="us-ascii"; format=flowed
In-reply-to: <001d01c2226f$04f3dc80$0601a8c0@webboy>
References: <1025681666.2337.16.camel@palomar><17PelE-08PdmCC@fmrl08.sul.t-online.com>
Reply-to: vdr@linuxtv.org
Sender: vdr-bounce@linuxtv.org

As I know it is only possible to change with the insmod-command parameter!

Gerhard

At 10:52 03.07.2002 +0200, you wrote:
>hello list!
>is it possible to switch the j2 output of a siemens v1.3
>via command-line parameter when loading the driver
>or will i have to recompile it?
>
>please help,
>
>thorsten
>

Follow-Ups:
- [vdr] Re: Hint for setting J2 output to y/c or rgb
  - From: Thorsten Wöll <thorsten.woell@dieterwoell.de>

References:
- [vdr] Cutting problems
  - From: Dariush Forouher <dariush@forouher.de>
- [vdr] Re: Cutting problems
  - From: Christian Berger <einStein@donau.de>
- [vdr] Hint for setting J2 output to y/c or rgb
  - From: Thorsten Wöll <thorsten.woell@dieterwoell.de>

Prev by Date: [vdr] Hint for setting J2 output to y/c or rgb
Next by Date: [vdr] Re: DVD-ROM silencer...
Previous by thread: [vdr] Hint for setting J2 output to y/c or rgb
Next by thread: [vdr] Re: Hint for setting J2 output to y/c or rgb
Index(es):
- Date
- Thread

Home | Main Index | Thread Index