[vdr] VideoLAN problems

[Martin Neuditschko <yosuke.tomoe@gmx.net>]

Hi!

I am using vdr-1.0.4 with AIO-22.06.

I do:
make DVD=1 STREAMING=1
export DVBVL_DEST="224.0.1.2"
export DVBVL_PORT="5004"
/sbin/route add -net 224.0.0.0 netmask 240.0.0.0 dev eth1
(eth1 is my internal network)
./vdr

In the OSD I set "Stream 1 Active" to "yes" and then press
F1 (Streaming ein)

Then I get these output in /var/log/messages:
Jul  3 22:05:46 melchior vdr[1849]: packets sent: 5000  max. packet size was: 1499  bitrate: (kbit/sec): 592
Jul  3 22:05:48 melchior vdr[1849]: packets sent: 6000  max. packet size was: 1496  bitrate: (kbit/sec): 594
Jul  3 22:05:51 melchior vdr[1849]: packets sent: 7000  max. packet size was: 1492  bitrate: (kbit/sec): 591
Jul  3 22:05:53 melchior vdr[1849]: packets sent: 8000  max. packet size was: 1500  bitrate: (kbit/sec): 592
Jul  3 22:05:56 melchior vdr[1849]: packets sent: 9000  max. packet size was: 1498  bitrate: (kbit/sec): 587
Jul  3 22:05:58 melchior vdr[1849]: packets sent: 10000  max. packet size was: 1500  bitrate: (kbit/sec): 594
Jul  3 22:06:01 melchior vdr[1849]: packets sent: 11000  max. packet size was: 1500  bitrate: (kbit/sec): 592
Jul  3 22:06:03 melchior vdr[1849]: packets sent: 12000  max. packet size was: 1498  bitrate: (kbit/sec): 592

Is this OK? Every 2-3 seconds a new line is very much, isn't it?

Then I set up my WinXP machine:
Than I installed dvbpl-020619 and Elecard MPEG2 Video Decoder 2.0 beta.
If I start dvbpl.exe and select "Start" from the menu I get this error:
FAILED(hr=0x80040154) in CoCreateInstance(CLSID_RTPAsync, NULL, CLSCTX_INPROC_SERVER, IID_IBaseFilter, (void**)&g_pRTPSource)


If I start MediaPlayer and try to open the URL: rtp://224.0.1.2:5002
I get the error that this is a unsupported protocol.
(I am able to play *.vdr / *.pva files with MediaPlayer)



I also tried to start mplayer on the Server machine:

melchior:~ # mplayer rtp://224.0.1.2:5002


MPlayer 0.60-2.95.3 (C) 2000-2002 Arpad Gereoffy (see DOCS!)

CPU vendor name: AuthenticAMD  max cpuid level: 1
CPU: Advanced Micro Devices Athlon K75 Pluto,Orion (Type: 6, Stepping: 1)
extended cpuid-level: 6
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled for x86 CPU with features: MMX MMX2 3DNow 3DNowEx
Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 26 audio & 70 video codecs
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using Linux's hardware RTC timing (1024Hz)
Playing rtp://224.0.1.2:5002
Connected to server: 224.0.1.2
Listening for traffic on 224.0.1.2:5002 ...
Unable to open URL: rtp://224.0.1.2:5002

Exiting... (End of file)


Have I forgotten something? Could someone give me a hint / help me, please?

best regards
Martin Neuditschko