Mailing List archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[vdr] AW: hauppauge dvb-s / IR-control / vdr
Did you create a lircd.conf? Irrecord doesn't work with the IR-receiver
of the DVB-s. You must create a lircd.conf with the codes of
/var/log/messages.
And you must edit the Makefile (DVB-Dir/driver/lirc), because the entry
is for lirc-0.6.4 and the path is wrong (in my case).
Then you must compile the lirc driver of the dvb driver and you get a
lirc_dvb.o
I made two entrys in the runvdr script.
"insmod lirc_dev" before loading the driver
And "insmod lirc_dvb.o" after loading the driver, but before loading vdr
-----Ursprüngliche Nachricht-----
Von: vdr-bounce@linuxtv.org [mailto:vdr-bounce@linuxtv.org] Im Auftrag
von Rainer Hattenhauer
Gesendet: Freitag, 12. Juli 2002 16:56
An: vdr@linuxtv.org
Betreff: [vdr] hauppauge dvb-s / IR-control / vdr
Another question:
had someone success to get the IR-receiver of the IR-remote control for
the
Hauppauge DVB-s (Rev.2.1) to work with vdr ?
I'm stucked on this point:
-Compiled lirc-0.6.5
-driver chosen: Hauppauge 2.1 DVB
-start DVB-driver
-start /usr/local/bin/lircd as root
Push the Remote and look into /var/log/messages:
Jul 12 16:43:26 august kernel: dvb: ircommand = 00000008
Jul 12 16:43:27 august kernel: dvb: ircommand = 80000006
Jul 12 16:43:27 august kernel: dvb: ircommand = 00000006
Jul 12 16:43:28 august kernel: dvb: ircommand = 80000005
Jul 12 16:43:28 august kernel: dvb: ircommand = 00000005
Jul 12 16:43:28 august kernel: dvb: ircommand = 80000004
Jul 12 16:43:29 august kernel: dvb: ircommand = 00000004
(i.e. noticed remote-control)
...a look into /var/log/lircd:
Jul 12 15:40:06 august lircd-0.6.5: caught signal
Jul 12 15:54:30 august lircd-0.6.5: lircd(hauppauge_dvb) ready Jul 12
15:55:17 august lircd-0.6.5: caught signal Jul 12 16:12:36 august
lircd-0.6.5: lircd(hauppauge_dvb) ready Jul 12 16:32:18 august
lircd-0.6.5: caught signal
(appeared when starting / stopping lircd)
vdr: compiled with REMOTE=LIRC option,
started vdr: no reaction on remote control.
Seems that the control is recognized by the dvb-driver, but not by lirc
...
Any ideas ?
Rainer
Home |
Main Index |
Thread Index