[vdr] Re: problems with rgb cable

["M Meddaugh" <meddo@gmx.net>]

I have now noticed that the squiggly pattern comes a half second after I
change the channel. For a brief moment its perfect though. Also the picture
isnt as "crisp" as the composite output. Damn this is bugging me now.....

Mike
----- Original Message -----
From: "M Meddaugh" <meddo@gmx.net>
To: <vdr@linuxtv.org>
Sent: Monday, November 18, 2002 1:35 PM
Subject: [vdr] Re: problems with rgb cable


>
>
>
> > M Meddaugh wrote:
> > > I made a J2 connection cable using a ribbon cable a few db-9 plugs and
a
> > > scart cable. The picture is pretty good and now I have color with my
> ntsc
> > > vcd's. The problem is there are squiggly lines in the background. Not
> like
> > > background noise due to a bad cable but more of a perfect pattern of
> tiny
> > > lines. I checked and rechecked the cable. So I was wondering if maybe
> its
> > > normal? It seems strange that I have a better picture with composite
> out.
> > > Any ideas?
> > Same problem here. But you're only the second one I've heard of. Maybe
> > the output of the card is damaged. I plugged out the connector to the
> > tv-set while tv and computer were powered on.
> I have 3 ntsc consoles hooked up to the scart input on the tv so the tv
> should be ok. I was thinking maybe it was the 5+ that was causing it since
I
> am using a dreamcast scart cable that had a resistor already. But I
removed
> the 5+ altogether and switched to AV manually on the tv with the same
> effect. This is also the second ribbon cable I am trying as I thought the
> first one was poor quality.
>
>
>
> --
> Info:
> To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as
subject.
>



-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.