[vdr] Re: Pinnacle pctv sat

[Demeter Tibor <tdemeter@net-working.hu>]

Hi Rene !

I try to use the VDR 1.1.15 with the Pinnacle pctv sat card (expremental 
pinnacle driver), but the vdr is not work.
The log report of vdr:

Nov 23 17:32:58 sirius-21 vdr[2834]: VDR version 1.1.15 started
Nov 23 17:32:58 sirius-21 vdr[2834]: loading /video/sources.conf
Nov 23 17:32:58 sirius-21 vdr[2834]: loading /video/diseqc.conf
Nov 23 17:32:58 sirius-21 vdr[2834]: loading /video/channels.conf
Nov 23 17:32:58 sirius-21 vdr[2834]: loading /video/svdrphosts.conf
Nov 23 17:32:58 sirius-21 vdr[2834]: loading /video/ca.conf
Nov 23 17:32:58 sirius-21 vdr[2834]: loading /video/keymacros.conf
Nov 23 17:32:58 sirius-21 vdr[2834]: ERROR: can't set filter
Nov 23 17:32:58 sirius-21 last message repeated 7 times
Nov 23 17:32:58 sirius-21 vdr[2834]: ERROR (dvbdevice.c,95): Unknown 
error 515
Nov 23 17:32:58 sirius-21 vdr[2834]: found 1 video device
Nov 23 17:32:58 sirius-21 vdr[2834]: setting primary device to 1
Nov 23 17:32:58 sirius-21 vdr[2834]: SVDRP listening on port 2001
Nov 23 17:32:58 sirius-21 vdr[2834]: ERROR: illegal OSD device handle (-1)!

Are you know a soulition for my problem? What is this error. I know the 
pct sat not contains a mpeg2 decoder chip, but i try the vdrstream and 
mplayer softwares for this problem...
I try to connect port 2001, but the vdr not listening on this port..

sILENCE

> Rene Bartsch wrote:
>
>> ----- Original Message -----
>> From: "Demeter Tibor" <tdemeter@net-working.hu>
>> To: <linux-dvb@linuxtv.org>; <vdr@linuxtv.org>
>> Sent: Monday, November 18, 2002 7:31 PM
>> Subject: [vdr] Pinnacle pctv sat
>>
>>
>>  
>>
>>> Hi All !
>>>
>>> I just now subscribed to this list mailing list. I have a Pinnacle pctv
>>> sat DVB card. I download a driver for this card from the linuxtv.org's
>>> "pinnacle experimental" CVS tree and after complie this driver i try
>>> some programs.
>>> The "DVBstream" program is working good (with mplayer) but the "vdr" is
>>> not  ! After i run the vdr binari, my hard drive is let's working 
>>> and my
>>> system is crashed !
>>> The pinnacle pctv sat driver does not working with VDR ?
>>>
>>> My system: p4,redhat8.0,gcc3.2, kernel2.4.19 recomplied
>>>
>>>   
>>
>>
>> 1.) You should at least use VDR-1.1.15 ( VDR-1.0.x-versions do not 
>> support
>> the current driver).
>>
>> 2.) The pinnacle-card does not have a MPEG-decoder, so you can't watch
>> something or see the OSD. You can only use VDR for recording 
>> controlled by
>> SVDRP-port (use VdrAdmin to controll VDR).
>>
>> 3.) Alternatively you can use a DXR3/Hollywood H+ as MPEG-decoder, 
>> but you
>> should be aware that the plugin is unstable and not all functions are
>> implemented yet (limited OSD-colours, ...)
>>
>> Rene
>>
>>
>>
>>  
>>
>
>
>
>


-- 
Demeter Tibor

Net-Working Szolgáltató és Kereskedelmi Bt.
2700 Cegléd, Rákócz út 56/A C lh. 1 em. 5
Tel.: +36 70/253-9567
Fax: +36 70/318-9705
E-mail: tdemeter@net-working.hu <mailto:tdemeter@net-working.hu>
http://www.net-working.hu






--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe vdr" as subject.