[vdr] rcu doesn't show up in irdadump

[daniel peess <mailinglists@peess.de>]

tach,

currently i'm trying to get my remote control to work with vdr.
as the pending log shows a sending siemens mobile is detected, but none of my
4 rcu.  all of them are non-programmable, does this matter? do your rcus show up in 'irdadump'?
maybe someone can drop some lines of irdadump while it's receiving rcu signals...  or do i have to configure 'lirc' first, as only 'irw' shows rcu signals?

bye,
daniel

p.s.: as <fraction@bpjs.org> before, i already mailed this message on
saturday. seems my messages were lost too...

root@streamer:~# lspci
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory
Controller Hub (rev 04)

a transceiver is connected, bios has got following setup ( other options in
brackets ):

IR Mode: 1.6 uS ( ASKIR; 3/16 Baud )
IR Duplex Mode: Half Duplex ( Full Duplex )
IR Pin Select: IRRX/IRTX ( SINB/SOUTB. )

root@streamer:~# lsmod
Module                  Size  Used by    Not tainted
irtty                   7456   2  (autoclean)
irda                  142444   1  (autoclean) [irtty]
serial                 43520   1  (autoclean)
root@streamer:~# cat /proc/interrupts
           CPU0
...
  3:       1106          XT-PIC  serial
...
root@streamer:~# echo 1 > /proc/sys/net/irda/debug
root@streamer:~# tail /var/log/messages
...
Apr 25 22:22:07 streamer kernel: IrLAP, no activity on link!
Apr 25 22:22:16 streamer last message repeated 3 times
...
root@streamer:~# tail /var/log/kern.log
...
Apr 25 22:20:59 streamer kernel: irda_init()
Apr 25 22:21:00 streamer kernel: IrDA: Registered device irda0
Apr 25 22:21:01 streamer kernel: irtty_net_open()
Apr 25 22:21:01 streamer kernel: irlap_change_speed(), setting speed to 9600
...
Apr 25 22:22:02 streamer kernel: irlap_change_speed(), setting speed to
115200
Apr 25 22:22:07 streamer kernel: IrLAP, no activity on link!
Apr 25 22:22:16 streamer last message repeated 3 times
Apr 25 22:22:17 streamer kernel: irlap_change_speed(), setting speed to 9600
Apr 25 22:22:17 streamer kernel: irlap_state_ndm(), media busy!
Apr 25 22:29:47 streamer kernel: irlap_change_speed(), setting speed to
115200
Apr 25 22:29:48 streamer kernel: iriap_connect_indication()
Apr 25 22:29:48 streamer kernel: irlmp_dup_Rec0bbbcc()
Apr 25 22:29:49 streamer kernel: irlmp_disconnect_indication(),
reason=LM_USER_R
EQUEST
Apr 25 22:29:50 streamer kernel: irlap_state_nrm_s(), retry_count = 0
Apr 25 22:29:51 streamer kernel: irlap_state_nrm_s(), retry_count = 1
Apr 25 22:29:52 streamer kernel: irlap_state_nrm_s(), retry_count = 2

root@streamer:~# irdadump
20:21:59.959693 xid:cmd 17941329 > ffffffff S=6 s=0 (14)
20:22:00.049675 xid:cmd 17941329 > ffffffff S=6 s=1 (14)
20:22:00.139670 xid:cmd 17941329 > ffffffff S=6 s=2 (14)
20:22:00.229671 xid:cmd 17941329 > ffffffff S=6 s=3 (14)
20:22:00.319674 xid:cmd 17941329 > ffffffff S=6 s=4 (14)
20:22:00.409675 xid:cmd 17941329 > ffffffff S=6 s=5 (14)
20:22:00.499672 xid:cmd 17941329 > ffffffff S=6 s=* streamer hint=0400 [
Computer ] (24)
20:22:01.459667 xid:cmd ffffffff < 05673982 S=6 s=0 (14)
20:22:01.549664 xid:cmd ffffffff < 05673982 S=6 s=1 (14)
20:22:01.639665 xid:cmd ffffffff < 05673982 S=6 s=2 (14)
20:22:01.639685 xid:rsp 17941329 > 05673982 S=6 s=2 streamer hint=0400 [
Computer ] (24)
20:22:01.719666 xid:cmd ffffffff < 05673982 S=6 s=3 (14)
20:22:01.809666 xid:cmd ffffffff < 05673982 S=6 s=4 (14)
20:22:01.899666 xid:cmd ffffffff < 05673982 S=6 s=5 (14)
20:22:01.999664 xid:cmd ffffffff < 05673982 S=6 s=* SIEMENS ME45 hint=b124 [
PnP Modem Fax IrCOMM IrOBEX ] (29)
20:22:02.559666 snrm:cmd ca=fe pf=1 17941329 < 05673982 new-ca=04 (32)
20:22:02.559749 ua:rsp ca=04 pf=1 17941329 > 05673982 (31)
20:22:03.119670 rr:cmd < ca=04 pf=1 nr=0 (2)
...





-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.