[vdr] Re: [PATCH] (DVB-T) statmux fix vbr tagging for pic header

[Gerald Raaf <graaf@attglobal.net>]

Hi,

Gerald Raaf schrieb:

> Hi,
>
> Oliver Endriss schrieb:
>
> > Oliver Endriss wrote:
> > >
> > > [vbf_delay driver patch]
> > >
> > > Replay and transfer mode should work now. Please test!
> > >
> > > If it works I'll ask the firmware people to check whether it can be
> > > fixed in the firmware.
> > >
> > > > >This might also help with old RTL recordings that cannot be played
> > > > > with the current firmware. I haven't had the time yet to look
> > > > > into this issue but I'll try to do this next weekend.
> > >
> > > Indeed, it also fixes the RTL bug. Great job, Gregor!
> >
> > Has anyone encountered problems after applying the patch?
> >
> > For me everything works fine.
> >
> > Oliver
> >
> > --
> > Info:
> > To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.
>
> I got a Problem with a Recording last evening on Premiere 1 with ac3 sound.
> The following occure, there are no error messages in any log or on display while
> recording, but when i replay the movie i got the error message "ERROR: frame larger than
> buffer (?? > ??)" the frame was about 10 time bigger than vdr will allow.
> I've used:
> vdr-1.1.31 with autopid and ac3 patch
> dvd, mp3, console, image, vdrcd, vcd plugins
> dvb driver cvs from 16.05.2003
> in the makefiles i have the hw_sections=0 and when loading the dvb_core i use buffers=5,
> at the moment i record on Premiere 1 again with ac3.
> The following is different
> vdr-1.1.32 the rest in vdr-installation is the same.
> dvb driver is also the same but wihtout buffers=5 in makefile.
>
> I'll report after viewing the movie later this evening or tomorrow.
>
> Gerald
>
> --
> Info:
> To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.

with this setup i've got also some video glitches, audio was ok.

But I think i must do some other tests next week, because all LL DVB-drivers and all vdr
1.1.xx versions i've got several problems, like
cam read erros after 20 or 60 minutes -> read error 10 seconds nothing (no audio or video)
then i can see the movie again, till the next cam read error occure
arm crashes only on the third dvb card and only when i use a single instance of vdr without
parameter -D

when i start 3 instances of vdr (with parameter -D) i didn't get the arm crashes, but
allways cam read errors regardless if i put 2 cards out of the box or use only 2 cards or on
which card the cam is connect.
normaly the cards are as follows
first card dvb nexus 2.1
second and third hauppauge dvbs 1.3

And i don't think its a equipement problem, because with the same system and vdr 1.0.4 and
dvb-driver 0.9.4 everything works fine.

Gerald



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.