[vdr] Re: CRC Check with sections

[nisele@t-online.de (Nikolaus Isele)]

> > i got still problems with my Allcam 4.6. in the Log i got
> "ERROR: CAM: Read
> > failed: slot 0, tcid 1" Messages.
>
> There haven't been any changes lately that I would have
> expected to fix this.
>
> > I don't have changed the hw_sections yet.
> > How can i change this? Is there a need for Updating my
> DVB-s 1.3 (primary)
> > and DVB-s 2.1 (secondary) Firmware? If yes, how? Is there a
> risk killing my
> > cards if i update the firmware?
>
> The driver uploads the firmware every time you start it, so
> there's no danger in that.
> Just get VDR version 1.2.1 and the dirver I suggested and try it.

I installed the 1.2.1 and the drivers that you recommended, but nothing
changes relating my allcam problem.
If i try to record with this vdr + driver combination, all recordings are
completely damaged.

The only way to get the recordings and cam working is to copy the files
described in "../DVB/driver/av7110/README-firmware" and recompile the driver
(thanx to Norbert Schmidt).
But this is not the best solution.

Regards, Niko





-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.