[vdr] Re: CRC Check with sections

[nisele@t-online.de (Nikolaus Isele)]

> Nikolaus Isele wrote:
> >
> > > > i got still problems with my Allcam 4.6. in the Log i got
> > > "ERROR: CAM: Read
> > > > failed: slot 0, tcid 1" Messages.
> > >
> > > There haven't been any changes lately that I would have
> > > expected to fix this.
> > >
> > > > I don't have changed the hw_sections yet.
> > > > How can i change this? Is there a need for Updating my
> > > DVB-s 1.3 (primary)
> > > > and DVB-s 2.1 (secondary) Firmware? If yes, how? Is there a
> > > risk killing my
> > > > cards if i update the firmware?
> > >
> > > The driver uploads the firmware every time you start it, so
> > > there's no danger in that.
> > > Just get VDR version 1.2.1 and the dirver I suggested and try it.
> >
> > I installed the 1.2.1 and the drivers that you recommended,
> but nothing
> > changes relating my allcam problem.
> > If i try to record with this vdr + driver combination, all
> recordings are
> > completely damaged.
> >
> > The only way to get the recordings and cam working is to
> copy the files
> > described in "../DVB/driver/av7110/README-firmware" and
> recompile the driver
> > (thanx to Norbert Schmidt).
> > But this is not the best solution.
>
> As I said, the CAM problem still exists and at the moment the only way
> to use CAMs that don't work with the LL firmware is to use the -icam
> firmware.
>
> What about FTA channels? Can you record these without errors?

No, it isn't possible, every recording is completely damaged.
I tried to set all CAMs to FTA in the CAM MENU, and remove the Allcam CI,
but it doesn't
fix the problem.

Regards, Niko




-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.