[vdr] Re: cTS2PES got NN TS errors [WAS: Re: Re: switching to channel N (once per second?)]

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Rainer Janson wrote:
> 
> ...
> > All I can say is that the VDR version 1.2.1 and the suggested driver
> > from the VDR download area work fine for me. I have no idea what's
> > going wrong at your side. I can only repeat that you absolutely, positively
> > have to make sure that hw_sections=1. With hw_sections=0 I had completely
> > damaged recordings from full featured DVB-S cards, and also Uwe Scheffler
> > had reported severe problems on his DVB-C cards, which were also cured by
> > setting hw_sections=1.
> >
> > Klaus
> 
> hi Klaus,
> 
> here I have the same problems (for a while). Until today I thought it was a
> problem with my Nova budget-card (newer model). I made a recording from
> channel 1 "ARD". After that, I switched to the next channels (2 = ZDF, 3 =
> RTL, 4 = Sat1). Only on channel 4 I have a verry jerky view of the live
> picture.
> 
> Same thing with linuxtv-dvb-1.0.0-pre3 and vdr 1.2.0. If I stop the recording,
> the picture on channel 4 is ok.
> 
> I use linux-dvb.2003-06-08 and vdr 1.2.1 (no plugins):

Well, this combination works fine here, so I'm afraid I can't help you.
You'll need to debug this yourself.

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.