[vdr] Re: CRC Check with sections

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Nikolaus Isele wrote:
> 
> > Nikolaus Isele wrote:
> > >
> > > > > i got still problems with my Allcam 4.6. in the Log i got
> > > > "ERROR: CAM: Read
> > > > > failed: slot 0, tcid 1" Messages.
> > > >
> > > > There haven't been any changes lately that I would have
> > > > expected to fix this.
> > > >
> > > > > I don't have changed the hw_sections yet.
> > > > > How can i change this? Is there a need for Updating my
> > > > DVB-s 1.3 (primary)
> > > > > and DVB-s 2.1 (secondary) Firmware? If yes, how? Is there a
> > > > risk killing my
> > > > > cards if i update the firmware?
> > > >
> > > > The driver uploads the firmware every time you start it, so
> > > > there's no danger in that.
> > > > Just get VDR version 1.2.1 and the dirver I suggested and try it.
> > >
> > > I installed the 1.2.1 and the drivers that you recommended,
> > but nothing
> > > changes relating my allcam problem.
> > > If i try to record with this vdr + driver combination, all
> > recordings are
> > > completely damaged.
> > >
> > > The only way to get the recordings and cam working is to
> > copy the files
> > > described in "../DVB/driver/av7110/README-firmware" and
> > recompile the driver
> > > (thanx to Norbert Schmidt).
> > > But this is not the best solution.
> >
> > As I said, the CAM problem still exists and at the moment the only way
> > to use CAMs that don't work with the LL firmware is to use the -icam
> > firmware.
> >
> > What about FTA channels? Can you record these without errors?
> 
> No, it isn't possible, every recording is completely damaged.
> I tried to set all CAMs to FTA in the CAM MENU, and remove the Allcam CI,
> but it doesn't
> fix the problem.

Well, everything you describe looks like the hw_sections problem.
If you can definitely rule that out, then I'm out of ideas.
Everything works just fine here...

Klaus
-- 
_______________________________________________________________

Klaus Schmidinger                       Phone: +49-8635-6989-10
CadSoft Computer GmbH                   Fax:   +49-8635-6989-40
Hofmark 2                               Email:   kls@cadsoft.de
D-84568 Pleiskirchen, Germany           URL:     www.cadsoft.de
_______________________________________________________________


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.