[vdr] Re: CRC Check with sections

[nisele@t-online.de (Nikolaus Isele)]

> Nikolaus Isele wrote:
> >
> > > Nikolaus Isele wrote:
> > > >
> > > > > > i got still problems with my Allcam 4.6. in the Log i got
> > > > > "ERROR: CAM: Read
> > > > > > failed: slot 0, tcid 1" Messages.
> > > > >
> > > > > There haven't been any changes lately that I would have
> > > > > expected to fix this.
> > > > >
> > > > > > I don't have changed the hw_sections yet.
> > > > > > How can i change this? Is there a need for Updating my
> > > > > DVB-s 1.3 (primary)
> > > > > > and DVB-s 2.1 (secondary) Firmware? If yes, how? Is there a
> > > > > risk killing my
> > > > > > cards if i update the firmware?
> > > > >
> > > > > The driver uploads the firmware every time you start it, so
> > > > > there's no danger in that.
> > > > > Just get VDR version 1.2.1 and the dirver I suggested
> and try it.
> > > >
> > > > I installed the 1.2.1 and the drivers that you recommended,
> > > but nothing
> > > > changes relating my allcam problem.
> > > > If i try to record with this vdr + driver combination, all
> > > recordings are
> > > > completely damaged.
> > > >
> > > > The only way to get the recordings and cam working is to
> > > copy the files
> > > > described in "../DVB/driver/av7110/README-firmware" and
> > > recompile the driver
> > > > (thanx to Norbert Schmidt).
> > > > But this is not the best solution.
> > >
> > > As I said, the CAM problem still exists and at the moment
> the only way
> > > to use CAMs that don't work with the LL firmware is to
> use the -icam
> > > firmware.
> > >
> > > What about FTA channels? Can you record these without errors?
> >
> > No, it isn't possible, every recording is completely damaged.
> > I tried to set all CAMs to FTA in the CAM MENU, and remove
> the Allcam CI,
> > but it doesn't
> > fix the problem.
>
> Well, everything you describe looks like the hw_sections problem.
> If you can definitely rule that out, then I'm out of ideas.
> Everything works just fine here...

How can i set the hw_sections parameter? Is it possible that the big
Hardware Rev. Numberdifference (1.3 and 2.1) between my two DVB-s Cards
causes the Problem?

Regards, Niko




-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe vdr" as subject.